The importance of the perception communication at work depending on Dissertation

The significance of the observation correspondence at work contingent upon the Generation X and Generation Y - Dissertation Example These assorted mentalities and standards decipher diversely in a work environment setting, with the two ages having one of a kind qualities related with what comprises a successful and inspirational plan of action. There are critical holes in research writing portraying what explicit attributes of a plan of action will spur and move laborers to accomplish top quality execution in the activity jobs of Generation X and Generation Y. In many regards, information on the two ages will in general represent Generation X as a free and stubborn age with pre-set up standards and qualities. In inverse accord, Generation Y is introduced as progressively liberal, adaptable, and achievement disapproved in the hierarchical setting. This sizeable hole in information explicitly incorporates information on the significance of interchanges for the two ages. ... 1.1 Research points and targets The point of this examination venture is to decide the degree of significance of interchanges in the work environment in accordance with the two ages. This is to decide whether correspondences procedures can be a successful inspirational model for both Generation X and Generation Y. This investigation keeps up three explicit goals: Determine what really persuades both Gen X and Gen Y in a work environment setting Determine how the two ages see correspondences as an inspirational device Identify demonstrated models of inspiration that have been powerful in boosting execution for both Generation X and Generation Y. The examination will talk with different auxiliary writing sources to paint a picture of the two ages, with uncommon spotlight on perspectives, standards, encounters, and desires for an authoritative occupation job. Aftereffects of discoveries will be contrasted with an essential exploration venture (which is depicted in this proposal’s approach area) to decide if correspondences can be viewed as a reasonable inspirational model for the two ages or for a solitary age. The aftereffects of this examination should help with shutting a portion of the holes in writing that as of now exists in regards to inspirational procedures for the two ages and suggest another model of inspiration that might improve business culture and vital execution when applied to Gen X and Gen Y. The objective of the task is to make an advancement in information about the two ages that can give new heading to supervisors in associations that battle with Gen X and Gen Y representatives to increase top quality execution and devotion to meet vital objectives both short-and

Alzheimer’s Disease Essay -- Alzheimers Disease Essays

Alzheimer’s Disease Alzheimer’s malady is a dynamic condition where the neurons degenerate in the mind, while the cerebrum substance contracts in volume. Alzheimer’s is additionally the main source of dementia. At the point when it was first seen, Alzheimer’s was believed to be a pre-decrepit illness, however now it is known to be answerable for seventy-five percent of the dementia cases in individuals more than sixty-five years old. Alzheimer’s ailment for the most part causes quite a while of individual and scholarly decrease til' the very end. Since there is an expanding number of old residents in the United States, investigation into the causes and potential solutions for the ailment is on the ascent (1). A few hypotheses have been made concerning factors that may cause the condition; in any case, the reason stays obscure. Some propose that it might be brought about by some kind of ceaseless contamination or from presentation to a metal that might be poisonous, for example, aluminum (1). This line of conviction started from elevated levels of aluminum stores being found in Alzheimer’s mind sores (2). It is additionally realized that individuals with Alzheimer’s have diminished degrees of cerebrum synthetic compounds, for example, acetylcholine (1). Moreover, individuals with Down’s Syndrome are bound to secure this dementia, with around fifteen percent of Alzheimer’s patients demonstrating a family ancestry of this infection. This leads numerous researchers to accept that there is a hereditary connect to the infection. At the point when twins have been considered, a high understanding rate has been found for the illness. Moreover, there is at times a prevai ling example of legacy of this malady, where an individual has a 50% possibility of securing it if either parent has Alzheimer’s (autosomal predominant transmission) (1,2). It is uncommon to secure Alzhei... ...al and family investigation of 22 twin sets. Nervous system science, 1987, 37, 359-3B3. 4. Thomas, C. L. Alzheimer’s Disease. Taber’s Cyclopedic Medical Dictionary, fifteenth ea., 1985, 61. 5. Murray, R. K., Cranner, D. K., Hayes, P. A. what's more, Rodwell, V. W. Statement of Amyloid Beta Protein is Involved in the Causation of Alzheimer’s Disease. Harper’s Biochemistry, 23rd ed., 1993, 750-752. 6. Miyakskawa, T., Katsuragi, S., Watanabe, K., Shimoji, A. what's more, Ikouchi, Y. Ultrastructure Studies of Amyloid Fibrils and Senile Plaques in the Human Brain,1986,70: 202-208. 7. Frazier, S. H. American Psychiatry Glossary, fifth. ed., 1988, 11; 50: 153. 8. Cohen, C. D. Valuable Information on Alzheimer’s Disease. Branch of Health and Human Services, 1990, 5-7. 9. Rosenberg, R. N. A Causal Role for Amyloid in Alzheimer’s Disease: The finish of the start. Nervous system science, 1993, 43:851-854.

AND THERE WAS A PILLOW FIGHT!!!

AND THERE WAS A PILLOW FIGHT!!! On March 1st, this was posted on the MIT 12 Facebook discussion board: On March 5th I received an e-mail from Tamara 12. Hey Snively! So, you want a fun activity to blog about (since we all know a good blog is the only reason to even wake up in the morning ;) ), go to the Boston pillow fight! Apparently theres some sort of pillow fight craziness going on in like 20 cities around the world and it sounds like just the crazy thing youd have fun at :) This paragraph was followed by all of the important details, which mentioned that the pillow fight would be happening on March 22nd in Copley Square. Hm, I thought, wouldnt it be cool if these things happened together? I wandered over to the Facebook group to throw the idea out there but lo and behold, Caroline 11 had already suggested it and *BOOM*, the meetup was scheduled around the pillow fight. While Im not a prefrosh, I do enjoy a good pillow fight every now and again, so I thought Id drop by and beat on some prefrosh. Also, campus was likely to empty out during Spring Break so a pillow fight could help to pass the time. I invited Michelle 11 to come along too since we both would be staying at MIT over the break (flights to Oregon are expensive). March 22nd came and Michelle and I loaded up our backpacks with pillows. I brought a video camera and a digital camera as well (Im a blogger, its what I do). We took the red line to Downtown Crossing and then hopped on the Orange Line to Haymarket. We popped out onto street level and looked around for prefrosh. None. We headed towards Dunkin Donuts for some hash browns and saw a girl with an MIT sweatshirt on. Michelle, see that sweatshirt? Thats a prefrosh! Quick, go into prefrosh mode! You see, Michelle and I had this plan to pretend we were prefrosh and see how long it would take the 12s to notice. We wandered into line and stood behind the girl in the sweatshirt. Michelle and I just stood there, casually chatting, when the girl turned around and asked Are you Michael Snively? So much for pretending to be a prefrosh. It turns out that the girl was Allison 12 and, like us, had totally misjudged how long it would take to arrive by T, meaning we were all about 15 minutes early. As we grabbed our hash browns and coffee we headed outside to wait for some more people to arrive. Arrive they did, and soon we had a group of 11 people gathered: 11s Michelle Yours truly 12s Allison Jean Paul Lauren Xiaoli Craig Andy Bassil Linley We set off for Modern Pastry, but not after I made sure we had a map, because its really easy to get lost in Boston. Our destination was to be Modern Pastry, which we found with relative ease (only got lost twice). Oh! I know why were going the wrong direction! Were on the wrong side of the street! Unfortunately it was packed and there was no room for us. We decided to find somewhere else to eat, which we also found with relative ease (only got lost once). We decided on a small little convenience store which served pizza and subs next to an outdoor market. From front to back: Bassil, Michelle, Xiaoli, Andy, Jean, Paul After scarfing we headed towards Copley for the pillow fight. This was also done with relative ease (lost only once) and along the way we found a truck that was giving out free Monster energy drinks. Full of food and full of caffeine we arrived at Copley an hour before the fight was scheduled to begin. We took that opportunity to chat about MIT, tell personal stories, and laugh at various people we saw walking around. Left to Right: Allison, Xiaoli, and Linley Left to Right: Jean, Andy, Bassil Left to Right: Craig, Paul, Lauren, Michelle Suddenly these two random ladies with backpacks on their chests walked up. Hey guys! Would you like some free Vitamin Water energy drinks!? We all looked at our half-empty (and free) Monster energy drinks and then gaged how much more crap we could fit in our stomachs . . . . SURE! To prove that they were doing their jobs, the girls had to take our picture while we held the energy drinks. As you can see, Im slightly confused by the whole thing. Im the only new one in this picture, Im sporting my new red hoodie As 2 oclock (H-hour for the pillow fight) neared we began seeing signs that massive carnage was about to take place. Reporters never mean good news We think Jean may have had a rock instead of a pillow Seriously, should I be worried? All of a sudden a masked man with a huge flag ran into the middle of the field and there was an uproar from the crowd. A siren went off and we ran like wild animals into the fray. Michelle stood back safely and caught the entire scene on film, which I have reduced to 43 seconds of mayhem We all survived the onslaught, even getting some really solid hits in (I leveled at least one person and still have the black face paint on my pillow to prove it). For some reason though I lost my ability to breathe like a normal human being and began gasping painfully for air. No more pillow fight for me! We all left the park thoroughly pillowed out. We hopped the T back to MIT so we could explore The COOP. On the T we noticed an interesting flaw in a Harvard based ad. Can you spot the mistake? We started losing members of our group as we got off the T and left The COOP. The remaining prefrosh were led on a super-special tour of Burton-Conner by Michelle and I (I say super-special because it makes me feel better about the fairly un-interesting tour I helped lead). After wandering the dorm a bit Michelle and I wished the pre-frosh happy travels and sent them on their way, making them promise to all come to CPW. Thus ends the Boston Admitted Students Meetup/Pillow Fight 2008. It was a blast, Im really glad I went. For those of you who wont have the opportunity to go to an admitted students meetup, dont worry. I didnt get to go to any when I was in high school, this was actually my first. Youll get plenty of chances to do all sorts of neat things once youre at MIT. And so, with that, I say goodbye. It is approaching bed time and I have an exciting day of (checks calender) absolutely nothing to do tomorrow. Maybe Ill play Worms: A Space Odyssey? Yeah, that sounds like a good idea . . .

The Character Of Benjamin The Donkey And His Skepticism Of...

For my reflective piece I chose to explore the character of Benjamin the donkey and his skepticism of things changing for the better. I chose to do this by writing a short story, telling one of the key scenes from Animal Farm from Benjamin s perspective. The reason I chose to write this is because even from the start of Animal Farm I have been interested in the character of Benjamin, and in how he must have felt for, although it could be argued he was right be skeptical, the realisation must have been, at the least, bittersweet. The piece is intended for people who have read Animal Farm completely. As he worked in the fields, weeding turnips, Benjamin supposed that he was a donkey. Although true as a purely physical statement, it was also where he suspected his continual skepticism came from. He admitted that things had taken a downturn since Snowball had been driven out but even in the early days of the rebellion, when everyone had been hopeful and optimistic, had he been a cynic, not to mention the 30 years beforehand. So far, with Boxer injured and Napoleon s growing indulgences, he believed himself to be justified. Things may change, for better or for worse, but they will always change back. Benjamin said to himself. A lesson from his father. As he pondered, out of the corner of his eye, he saw a flash of light. He frowned. One of the few signs of Benjamin s age was his degrading eyesight. Even so, there appeared to be something moving down the

A Beginners Guide to Reading a Map

In an age when mapping apps are commonplace, you may think traditional map reading an obsolete skill. But if you enjoy hiking, camping, exploring the wilderness, and other outdoor activities, a good road or  topographic map can be your best friend. Real maps are reliable. Unlike cell phones and GPS devices, there are no signals to lose or batteries to change with a paper map—you can trust that theyll get you where you need to go. This guide will introduce you to the basic elements of a map. Legend Cartographers or map designers use symbols to represent different elements of a map. The legend, also called a key, is the map feature that shows you how to interpret these symbols.  Legends are often in the shape of a rectangle. While not exactly the same across the board, many symbols in a legend are fairly standard from one map to another. A square with a flag on top usually represents a school and a dashed line usually represents a border. Note, however, that map symbols often used in the United States are generally used for different things in other countries. The symbol for a secondary highway used on a United States Geological Survey topographic map, for example, represents a railroad on Swiss maps. Title A maps title tells you at a glance what that map is depicting. If youre looking at a map called A Road Map of Utah, you can expect to see interstate and state highways, plus major local roadways across the state. A Utah Geological Map, on the other hand, will depict specific scientific data for the region, such as city groundwater supplies. Regardless of the type of map youre using, it should have a useful title. Orientation A map isnt very helpful if you dont know you dont know your position on it. Most cartographers align their maps so that the top of the page represents north and use a small arrow-shaped icon with an N beneath it to point you in the right direction. Keep north at the top of your page. Some maps, such as topographic maps, instead point to true north (the North Pole) or to magnetic north (where your compass points, to northern Canada). More elaborate maps may even include a compass rose, depicting all four cardinal directions (north, south, east, west). Scale A life-sized map is simply impossible. Instead, cartographers use ratios to reduce a mapped region to a much more manageable size. A maps scale tells you what ratio is being used or, more commonly, depicts a given distance as the equivalent of a measurement. For example, 1 inch representing 100 miles.   The scale of a map will be smaller for large regions and larger for small regions depending on how much an area has been shrunken to fit. Color There are many color schemes used by cartographers for different purposes. Whether a map is political, physical, thematic, or general, a user can look to its legend for an explanation of colors.   Elevation is commonly represented as various dark greens for low or below sea level areas, browns for hills, and white or grays for areas of highest elevation. A political map, depicting only state and national borders or boundaries, uses a wide range of colors to separate states and countries. Contour Lines If youre using a topographic map that depicts changes in elevation in addition to roads and other landmarks, youll see wavy and meandering brown lines. These are called contour lines and represent a given elevation as it falls upon the contour of the landscape. Neatline A neatline is the border of a map. It helps to define the edge of the map area and keep things looking organized. Cartographers may also use neatlines to define offsets, which are mini-maps depicting magnified important areas or those not within the maps boundaries. Many road maps, for example, contain offsets of major cities that show additional cartographic  detail like local roads and landmarks.

America Is Still on Top - 1505 Words

Analyzing the Article â€Å"America, Still on Top† American universities currently do a better job overall at preparing students for the society. Vartan Gregorian in his article â€Å"America, Still on Top†, declares that one of the great strengths of U.S. higher education is that it grew by â€Å"informal design†. He mentions the 1862 Morrill act, which the states were able to found colleges by using federal lands. Also states created universities, junior city and county colleges. In this article Gregorian compare the universities in America with some countries especially China. He talks about the private universities in some countries and discusses the reason that they are not as successful as American’s Universities. Also he talks about†¦show more content†¦In some countries all the students cannot enter universities because there are not enough universities, but they are willing to continue their education. So some low-quality universities are built up that Gregorian names them as â€Å"universities only in name†. He brings an example of these kinds of private universities in the central India n state of Chhattisgarh. Also in these kinds of universities some people just want to consider as a student and get a degree and probably get a good job in the future. They enroll in these universities that have poor quality. This is a really good argument that he mentioned. This shows the difference in quality between the universities in America and other countries. Paying good salaries to the professors in the U.S can have a positive effect on the quality of the universities in America, but it is not everything. Gregurian claims that: â€Å"Faculty is also an issue: In many countries, professors are poorly paid and institutions rely on temporary adjuncts, lectures and part- timers†. This is a good point. When the institutions in other countries rely on temporary staff, the quality of education will decrease compare to schools in America that do not have these kinds of problems. Again he does not mention the name of the country and school. He does not have ethics in his writing. He brings good examples, but they are not credible. I agree that teachers, who get good salaries, work betterShow MoreRelatedAre We A Fast Food Nation?1332 Words   |  6 Pagesdrive to drive thru, receive food in a instance, and it has become a habit. Since the recession the fast food industry has recover and it’s doing better than ever. The burgers being the most popular fast food sold in America. America is also in the top 10 fast food nations. America is a fast food nation. Americans fast food nation did not just happen overnight. Instead it started with some hot dog and hamburger stands (Mifflin). Then they started to spread and build restaurants until they were allRead MoreAustralia And The United States1293 Words   |  6 Pagesoperation across the Pacific Rim region. America is located about 15,175km away. Both these countries are relatively close to each other but still work close together within trade and giving aid to other countries. America’s latitude and longitude is 38.8833 ° N, 77.0167 ° W whereas Australia’s is 35.3080 ° S, 149.1245 ° E. Below shows 2 maps, 1 of each country and its there boarders on to other countries Annotated Map of both countries: America on top and Australia underneath Scale Source:Read MoreThe And Glass Ceiling Is Real1561 Words   |  7 Pages 2017 And Glass Ceiling Is Real In the United States of America, men seem to want full control. Corporations, organizations, schools even religions have been created by men and for men and they have great opposition to women infiltrating their management positions. Men have created glass ceilings for women in the workplace. A glass ceiling is an artificial barrier that allows women to see the top of the corporate ladder, but at the same time denies them access to the higher rungs of that ladderRead MoreUS Citizens and Online Poker Playing644 Words   |  3 PagesTop guidance for US citizens that how can they play online poker and which sites allow them to play This is really very bad act done by jury of USA that their citizens can’t enjoy the thrill of play online poker. This is a wonderful game and it should be allowed for each and every citizen of that country. Hence almost people in America do work in office and other sectors. They don’t have time to go Vegas and other gamboling destinations. What can they do, if they want to play this game? For sureRead MoreEssay about Persuasive Speech1211 Words   |  5 Pagesthese vehicles, the job security it helps with in America and how American manufactures have now stepped up to the plate with their new innovated designs for the auto industry. Let’s take it a step further J.D. Power amp; Associates recently released their results of the 2012 dependability survey. This survey ranked 37 different automakers based upon how many complaints Vehicle owners reported. To no surprise the survey showed that two of the top four ranking vehicles were held by luxury car makersRead MoreThe Best Chance At Success1144 Words   |  5 Pageslife; a life that was more rewarding for their hard work. What country could offer them this? Their best chance at success was the United States and that is exactly where they went. The United States offered a top notch lifestyle for those willing to earn it. Because America was at the top, not just in lifestyle, but in wealth and security, my parents made the easy decision to leave what they once called home to establish a new one. My parents often told me that it was a privilege for me to haveRead MoreOil Prices And The World Wide Recession1301 Words   |  6 Pagesof setting price and how the industry can still have the profit. Also, this paper will analyze the market structure by using Porter’s Five Force so that can clearly understand the notion of the market. In short, this paper will analyze NASIC to calculate CR4 and other indicators. The purpose of this paper is that explaining oil market structure in NASIC and figuring out who has the price setting power. Body Gas and Oil industry code in North America is NASIC 211, which was in April 2010. ActuallyRead MoreThe Election Of The Last Election851 Words   |  4 Pagesdifferent parties. America runs on a two-party system consisting of republicans and democrats and for years these two parties have been going head-to-head for a seat in the presidential election. An article from Gallup explains how the process actually works. It takes about 2 years to be placed into office starting from the day a candidate announces that they are running. Before they actually face off election, primary elections are held. States vote among themselves for which top candidate they wantRead MoreThe Glass Ceiling and How Gender Discrimination Affects Women1277 Words   |  6 PagesCeiling and How Gender Discrimination Affects Women Does Father really know best? In Corporate America, men seem to want full control. Our organizations have been created by men for men and they have great opposition to women infiltrating their management positions. Men have created glass ceilings for women in the workplace. A glass ceiling is an artificial barrier that allows women to see the top of the corporate ladder but at the same time denies them access to the higher rungs of that ladderRead MoreAffirmative Action : The Act Of Letting Someone Acquires Education And Job Opportunities1046 Words   |  5 Pagesopportunities because they were unable to do so before due to race, ethnicity, etc. Everyone came to the United States to learn and increase their education; however, due to the complications that some universities and schools enforce, how can they? America took years and years to convince that affirmative action is the best way for everyone to have the privilege to learn, regardless of race, ethnicity, or color. The baffling factor of how difficult the minorities have to face just so they can sit in

Donatello Essay Research Paper Donatello free essay sample

Donatello Essay, Research Paper Donato di betto bardi Donatello ( 1386-1466 ) was a maestro of sculpture in bronze and marble and was one of the greatest Italian Renaissance creative persons of his clip. A batch is known about his life and calling but small is known about his character and personality. He neer married and seems to be a adult male of simple gustatory sensations. Patrons frequently found him difficult to cover with and he demanded a batch of artistic freedom. The letterings and signatures on his plants are among the earliest illustrations of classical Roman inscription. He had a more elaborate scope of cognition of antediluvian sculpture than any other creative person of his clip. His work was inspired by ancient ocular illustrations which he frequently transformed, he was truly viewed as a realist but subsequently research showed he was much more. Early calling. Donatello was the boy of Niccolo di Betto Bardi, a Florentine wool carder. It is non known how he started his calling but likely learned stone carving from one of the sculpturers working for the cathedral of Firenze about 1400. Some clip between 1404 and 1407 he became a member of the workshop of Lorenzo Ghiberti who was a sculpturer in bronze. Donatello # 8217 ; s earliest work was a marble statue of David. The # 8220 ; David # 8221 ; was originally made for the cathedral but was moved in 1416 to the Palazzo Vecchio which is a metropolis hall where it long stood as a civic-patriotic symbol. From the 16th century on it was eclipsed by the mammoth # 8220 ; David # 8221 ; of Michelangelo which served the same intent. Other of Donatello # 8217 ; s early plants which were still partially Gothic are the impressive seated marble figure of St. John the Evangelist for the cathedral and a wooden rood in the church of Sta. Croce. The full power of Donatello foremost appeared in two marble statues, # 8220 ; St. Mark # 8221 ; and # 8220 ; St. George # 8221 ; which were completed in 1415. # 8220 ; St. George # 8221 ; has been replaced and is now in the Bargello. For the first clip the human organic structure is rendered as a functional being. The same qualities came in the series of five prophesiers statues that Donatello did get downing in 1416. The statues were of beardless and bearded Prophetss every bit good as a group of Abraham and Isaac in 1416-1421 and besides the # 8220 ; Zuccone # 8221 ; and # 8220 ; Jeremiah # 8221 ; . # 8220 ; Zuccone # 8221 ; is celebrated as the finest of the belfry statues and one of the creative person # 8217 ; s chef-doeuvres. Donatello invented his ain bold new manner of alleviation in his marble panel # 8221 ; St. George Killing The Dragon # 8221 ; ( 1416-1417 ) . The technique involved shallow carving throughout, which created a more dramatic consequence than in his earlier plants. He no longer modelled his forms but he seemed to # 8220 ; pigment # 8221 ; them with his chisel. Donatello continued to research the possibilities of the new technique he would utilize in his marble alleviation of the 1420 # 8217 ; s and early 1430 # 8217 ; s. The best of these were # 8221 ; The Ascension, with Christ Giving the Keys to St. Peter, # 8221 ; the # 8221 ; Feast of Herod # 8221 ; ( 1433-1435 ) , the big stucco roundels with scenes from the life of St. John the Evangelist ( 1434-1437 ) , and the dome of the old vestry of S. Lorenzo shows the same technique but with coloring material added. Donatello had besides become a major sculpturer in bronze. His earliest work of this was the more than life size statue of St. Louis ( 1423 ) which was replaced half a century subsequently. Donatello in partnership with Michelozzo helped with all right bronze image on the grave of the Catholic Pope John XXIII in the baptismal font, the # 8220 ; Assumption of the Virgin # 8221 ; on the Brancacci grave and the dance angels on the out-of-door dais of the Prato Cathedral ( 1433-1438 ) . His going from the criterions of Brunelleschi did non travel to good between the two old friends and was neer repaired. Brunelleschi even made quips against Donatello. During his partnership with Michelozzo, Donatello made plants of pure sculpture, including several plants of bronze. The earliest and most of import of these was the # 8220 ; Feast of Herod # 8221 ; ( 1423-1427 ) . He besides made two figurines of Virtues and so three bare kid angels ( one which was stolen and is now in the Berlin museum ) . These statues prepared the manner for the bronze statue of David, the first big graduated table, free-standing bare statue of the Renaissance. It was the most classical of Donatello’s plants and was done for a private frequenter. Its recorded history begins with the nuptials of Lorenzo the magnificent in 1469, when it was placed in the courtyard of the Palazzo Vecchio. Whether the # 8220 ; David # 8221 ; was requested by the Medici or non, Donatello worked for them ( 1433-1443 ) , bring forthing sculptural ornaments for the Old Sacristy in S. Lorenzo, the Medici church. Works at that place included ten big alleviations in colored stucco and two sets of little bronze doors which showed saints. Paduan period. In 1443 Donatello was about to get down work on two more bronze doors for the cathedral. He started work on a statue of Erasmo da Narmi, called Gattamelata, who had died shortly earlier. Donatello did most of the work on the statue between 1447 and 1450 but the statue was non placed on the base until 1453. It shows him in classical armor, the wand of bid in his raised right manus. This statue was the ascendant of all the memorials erected since. Its celebrity was spread far and broad. Even before it was on public position, the King of Naples wanted Donatello to make the same sort of statue for him. In the early 1450 # 8217 ; s, Donatello started to work on some of import plants for the Paduan church of S. Antonio. These plants included a bronze rood and a new high communion table. His richly decorated architectural plants of marble and limestone include seven lifesize bronze statues, 21 bronze alleviations of assorted sizes, and a big limestone alleviation, # 8220 ; Entombment of Christ. # 8221 ; The lodging for these was destroyed a century subsequently and the present agreement, dating from 1895 is incorrect historically. The Madonna and St. Francis are outstanding and the finest of the alleviations are the four miracles of St. Anthony. Donatello was great in managing big Numberss of figures ( one alleviation has more than one 100 ) which predicts the building criterions of the High Renaissance. Donatello was non making much work the last three old ages at Padua, the work for the S. Antonio communion table was unpaid for and the Gattamelata memorial non placed until 1453. Offers of other topographic points reached him from Mantua, Modena, Ferrara, and even Naples, but nil came of them. He was clearly go throughing through a crisis that prevented him from working. He was subsequently quoted as stating that he about died # 8220 ; among those toads in Padua. # 8221 ; in 1456 the Florentine doctor Giovanni Chellini noted he had successfully treated the maestro for a drawn-out unwellness. Donatello merely completed two plants between 1450 and 1455, the wooden statue # 8220 ; St. John the Baptist # 8221 ; and a figure of Mary Magdalen. Both works show new world, Donatello # 8217 ; s once powerful organic structures have become shriveled and spidery. When the # 8221 ; Magdalen # 8221 ; was damaged in the 1966 inundation at Florence, Restoration work revealed the original pai nted surface, including realistic flesh tones and aureate high spots throughout the saint # 8217 ; s hair. Late Florentine period. During his absence, a new coevals of sculpturers who excelled in the intervention of marble surfaces had rose in Florence. With the alteration in Florentine gustatory sensation, all of Donatello # 8217 ; s of import petitions came from outside Florence. They included the bronze group # 8220 ; Judith and Holofernes # 8221 ; which is now standing before the Palazzo Vecchio and a bronzy statue of St. John the Baptist for Siena cathedral, besides undertook the work of the brace of bronzy doors in the late 1450 # 8217 ; s. This undertaking, which might hold rivalled Ghiberti # 8217 ; s doors for the Florentine baptismal font, was abandoned about 1460 for unknown grounds. The last old ages of Donatello # 8217 ; s life were spent planing duplicate bronze daiss for S. Lorenzo, and once more in the service of his old frequenters the Medici, he died on December 13, 1466. These duplicate bronze daiss covered with reliefs demoing the passion of Christ, are plants of enormous religious deepness and complexness. Even though some parts were left unfinished, they had to be completed by lesser creative persons.

Full Sentence Outline free essay sample

I chose to have them as the main points so that they could lead off my arguments and I would be able to prove my point with each statement following that. I want my story to flow nice and smoothly so I tried to place everything in an order so that one sentence flows smoothly into the next. I stated the facts about how a healthy heart should function and how an unhealthy heart may function to support any counterarguments. I also mentioned the benefits of minimally invasive surgery and nanotechnology versus traditional cardiac health care.

Effect of Temperature on Enzyme Activity Essay Example

Effect of Temperature on Enzyme Activity Essay Example Effect of Temperature on Enzyme Activity Paper Effect of Temperature on Enzyme Activity Paper The objective of this experiment was to determine the effect of temperature on the rate that enzymes work. The purpose was to determine whether increasing the temp made the enzymes more active, and if so, at what temperature does the activity start to decline. The experiment consisted of thirty test tubes, with 5 test tubes at each temperature. The temperatures used were 10, 20, 30, 40, 50, and 60 degrees Celsius. For each temperature there were four test tubes with a sucrose substrate, a buffer, and an enzyme, and one test tube with just sucrose substrate, a buffer, and distilled water. After the liquids were mixed and left for exactly twenty minutes, DNS was added to each test tube and then each tube was boiled for 10 minutes, and finally the test tubes were removed from any heat and distilled water was added. Finally the blank test was placed in the photo spectrometer, and the results were compared the other four test tubes to determine the absorption rate for each temp. Compared with the best fit line for the given data, the average absorption was plotted and then calculated to determine the micro-moles of sucrose at each temp, and from there the rate of micro-moles of sucrose per minute. The results were that at 10, 20, 30, 40, 50, and 60 degrees Celsius the average absorbance was .2895, .6880, .9100, 1.515, 1.670, and 1.345 respectively. This shows that from 10 to 50 degrees Celsius the enzyme activity increased, however at some point above 50 degrees Celsius the enzyme activity decreased. This implies that enzymes are more active around 40 and 50 degrees Celsius and less active either below or above those temperatures. The data provides grounds for a conclusion that enzymes are more active around 40 and 50 degrees Celsius, and less active on either end, with the activity declining sharply toward either extreme. Introduction The purpose of the experiment was to determine the effect of temperature on enzyme activity, specifically Invertase. Invertase is an enzyme that catalyses the cleavage of Sucrose into Fructose and Glucose. Enzymes are catalytic proteins that are used to speed up reactions. Enzymes speed up reactions by lowering the activation energy needed to complete a reaction in four ways: by bringing the substrates close together, orientating the substrates correctly, promoting acid-base reactions, and excluding water from the reactive environment. In order for a chemical reaction to occur, the necessary components of the reaction must first interact with each other. In most cases, this interaction is orientation specific: one collision between 2 molecules will allow the reaction to proceed while another collision of different molecules will not. The active site of an enzyme not only provides a specific environment for substrates to interact, but correctly orients the substrates involved, allowing the reaction to proceed. Acid-base reactions are a major component of many chemical reactions. Enzymes promote acid-base reactions by bringing proton-accepting and proton-donating R groups of amino acids in close proximity to substrates. Another way enzymes lower the activation energy is by shutting out H20. Enzymes bind substrates so tightly in their active site that some or all of the water molecules in solution are shut out. The absence of water molecules greatly lowers the activation energy for reactions that require a non-polar environment or reactions that occur between hydrophobic substrates. While enzymes do lower the activation energy of reactions, the rate at which they do this depends on many factors. Temperature is one of the factors that determines at what rate enzymes will catalyze reactions. All enzymes have a temperature range at which they catalyze the most reactions. Also at either end of the temperature spectrum, enzymes will cease to work. Enzymes are held together by a combination of Hydrogen Bonds, Hydrophobic interactions, and Vander wall interactions. These weak, non-covalent interactions can only hold enzymes together under very specific environmental conditions (temperature, PH, salt concentration). As any or all of these conditions become too harsh, the non-covalent bonds which hold the enzyme together are no longer able to do so. At the coldest temperatures, enzymes will not work because the particles in a specific solution would not move, and therefore the enzymes will not come in contact with any substrates with which to react. At the hottest temperatures the weak non-covalent bonds are not strong enough to hold the high energy components of the enzyme together. This experiment, while important is in no way groundbreaking. The data collected will not surprise anybody, but it will help to reinforce the conclusion that temperature effects enzyme activity in the way that at extremes of temperature enzymes will not work, and somewhere in between the lack of activity will be the ideal temp for each specific enzyme. Also this experiment will help the class learn firsthand how temperature, and all the other factors that effect enzyme activity, actually do. Each section of the experiment had a specific purpose, to aid in the formulation of a conclusion. The goal was to test the effect of temperature on enzyme activity. To test this, 5 test tubes were heated at temperatures at 10 degree intervals between 10 and 60 degrees Celsius, four with all the solutions present, and one constant with everything except the enzyme. The purpose of the control was to determine the color change (absorption rate) of the sucrose solution compared to a test tube without any enzyme. In case there was a change in color even without the enzyme, the control would determine how much change was due to enzyme activity, and how much was unrelated. After the heating at each specific temp for 20 minutes, DNS was added. The purpose of DNS was to stop the reaction and provide data for how much enzyme activity took place. The DNS reacted with the glucose, and the solution with DNS would change color depending on how much sucrose was separated into glucose and fructose. The more enzyme activity the darker the color, and the darker the color the more light would be absorbed by the test tube while in the spectrophotometer. Without the DNS one would not be able to tell with such accuracy just how active the enzyme Invertase was. The test tubes were placed in boiling water when the DNS was added to speed up the particles and to make sure everything that could react, did. Methods and Materials Initially, fairly large beakers containing tap water were heated to temperatures between 10 and 60 degrees Celsius at 10 degree intervals. When the water in these beakers reached the desired temperature, using whatever method necessary, the water was manipulated to stay at the temperature for as long as necessary, at least 30 minutes. After the desired temp was reached, 5 test tubes for each temperature were prepared, and each test set of test tubes was numbered 1-4, and B. All 5 test tubes were initially filled with .5ML of the sucrose substrate, and .5ML of the buffer. After that four of the test tubes had .5ML Invertase added, while the other had .5ML of distilled water added. Once all the necessary solutions had been added, the set of 5 test tubes, (one control and four with enzyme) for each temperature level were added to the temperature specific bath. The test tubes were placed in the bath in such a way that the test tubes would rest inside the beaker, with the heated or cooled water effecting the temperature inside the beaker. However there would be no contact between the heated water and the solutions inside the test tube. For the next 20 minutes each set of 5 test tubes was kept inside each temperature specific beaker, with the necessary adjustments being made to assure steadiness of temperature. When 20 minutes was up, each set of 5 test tubes was removed, and separated to avoid confusion of data. After the beakers were taken out, 1ML of DNS was added to each test tube in each temperature, then the tubes were covered with aluminum foil, and finally all the test tubes were placed in a beaker with boiling water for 10 minutes. After 10 minutes all the test tubes were removed from the boiling water bath. Next .5ML of distilled water was added to each beaker, then aluminum foil was placed over the top, and finally each test tube was cooled under cold water. After all the test tubes were cooled, each set of 5 was separated and prepared for the spectrophotometer. For each temperature level the following description is the same. The OD was set to 540 nm, and then the temperature blank was used to then set the transmission percentage. Then the four test tubes that contained the enzyme were placed in the Spectrophotometer and their values were compared with the blank test tube. The transmission for each of the four variable tubes was averaged to obtain an average for each temperature value. Finally a graph was made using the given data. The data obtained in the experiment was then compared with the best fit line of the graph of the given data, and the rate of enzyme activity for each temperature was calculated. Using the calculated data, a new graph was made with temperature and rate and the X and Y axis, to show visually the effect of temperature of enzyme activity. Used in this experiment were 6 large beakers, for the heating and cooling of the temperature baths. Also used were a few small beakers to hold the sucrose solution, the buffer, and the Invertase. To hold the 4 variable solutions and the one control for each temp value, 30 regular test tubes were used. To heat the large beakers two electrically powered burners were employed. To write on the test tubes the groups used wax pencils, and finally to accurately measure amounts of each solution syringes were used.

Research/Literary Analysis Research Paper Example | Topics and Well Written Essays - 1250 words

/Literary Analysis - Research Paper Example One of the potent criticisms of the text lies in the psychoanalysis and the social psychology that were very much inherent during the time of the story’s publication related with the newly envisaged theory of sexual selection by Darwin. However, the story, â€Å"The Story of an Hour† brings into contention many critical and psychological theories operating subtly within the tight-lipped and fast paced plot of the story which has a social importance at the contextual level as well. This essay intends to analyses the story, â€Å"The Story of an Hour† and keeping in central position the character of the protagonist Louise Mallard helps to explain the socio-psychological position of the women in the contemporary society. THE STORY OF AN HOUR: AN ANALYSIS The story, â€Å"The Story of an Hour† centers round the life and struggle of a woman name Louise Mallard. The story had to face a volley of criticisms for considering a woman character as its protagonist and evoked a volley of controversies for selecting a woman at the center of the plot during the late Victorian era. In addition, the fact that the woman feels elated by hearing the news of her husband’s death, the kind of liberation of soul along with feeling of being free expressed after understanding that her husband is not going to return any more enable to envision the story as a feminist text at the outset. The confusion that whether the text, â€Å"The Story of an Hour† is a story of liberation or tragedy will always remain intact. At one hand, the death of her husband who has never shown enough concern or care to love his wife comes into surface. On the other hand, Louise starts to believe that her husband’s death is going to bring him freedom for her physically, mentally and sexually. And, this has to be taken into consideration that Louise is a representative of her time and society. The story is a raging war against patriarchy prevailing at the Chopinâ₠¬â„¢s time and challenges the idea of marriage and the false and the much hyped values associated with it. This can be well understood through the predicament and emotional turmoil that the protagonist of the story undergoes within an hour time span when she is not sure of her husband’s death. In the book, â€Å"The Story of an Hour : Kate Chopin’s Voice Against Patriarchy â€Å" by Anonym quotes worthily that â€Å"Chopin made women the subject of the patriarch-centered world by stressing the male boundaries and showing alternative ways for women to get out of this world by developing an own identity† (Anonym 12). Breaking the shackles of married life and liberating women only for the sake of liberation were not the sole agenda of the story. On the contrary, Chopin wanted to give a progressive dimension by providing a voice to a woman who wanted to be free and seek her own identity. The selection of Louise as the protagonist was intentional and to review the emotional turmoil of a woman who is not sure to express grief or gaiety at the news of her husband’s death through the eyes of Louise herself was deliberate. At this juncture, another female protagonist Josephine could have been a sorted choice or even a third person narrator. However, one has to understand the motif of Chopin behind framing the story and presenting it through the voice of the protagonist herself. Alan Cheuse insightfully mentions in the book, â€Å"

Foreign Direct Investment Term Paper Example | Topics and Well Written Essays - 1000 words

Foreign Direct Investment - Term Paper Example The power theory  explains why a firm will invest abroad, it is a classical theory developed by the work of Adam Smith who stated that as firms grow and profits increase foreign direct investment enable the firm to shift surplus capital by investing elsewhere, the firm will also invest abroad due to increased competition in the home country and therefore decides to invest abroad where there is low competition. The work of Karl Marx also explains the existence of foreign direct investment, according to Marx as the rate of consumption in the home country decreases the profits of the firm declines and for this reason, the firm will invest abroad for the reason of increasing consumption levels and profit levels.   Therefore a firm according to this macroeconomic theory will invest abroad due to their abundance in capital and they will invest in the country which uses labor-intensive means of production in order to increase profits as the cost of production is lower, the firm will find it more advantageous to invest in a country where labor cost is lower as the cost of labor in the home country is higher than the country abroad.  Ã‚   investing overseas, the firm which invests in other countries will experience economies of scale by investing in other countries which will be experienced due to the intangible assets that they possess, such intangible resources include skilled management and organizational know-how which aid in experiencing the economies of scale when they invest abroad. The firms, therefore, will experience economies of scale in the market abroad due to their possession of technological know-how whereby they will be in a position to reduce their cost of production.   Location advantage theory: This theory explains the product cycle which involves the production of new products using new technology and this products are first introduced to the home market, by investing abroad therefore the firm will be in a position to easily shift the production of these new products due to the nearness to the market abroad and also low cost of factors of production.

A Probation And Parole Criminology Essay

A Probation And Parole Criminology Essay The idea of the corrections system has been around for a while. Within this system there lies several different types of programs that do not require an offender to be placed in a prison or jail. These programs to allow the offender to remain out in the community, while being closely monitored. The earliest and most common programs are probation and parole. These two programs allow most offenders to be in their normal everyday setting, unless otherwise stated by the judge or probation or parole officer. Usually this is the sentence given to offenders who have a non-violent offense and are less likely to run away. These are the offenders who are seen to be harmful to society. Probation and parole are two of the easiest ways to help with problems within the jail such as overcrowding. Background/History Probation and parole are two of the oldest programs within the corrections system that takes care of non-violent offenders. Before the development of these programs, the offenders would be placed into the same facilities as all the other offenders. This wasnt fair to the offenders, nor was it helpful to the staff there. The actual goal of probation and parole was not to place these people into prisons or jails, but to rehabilitate them while in the care of their community. Probation John Augustus was the father of probation, although there were similar practices around 437 BC. Augustus was your average, everyday man. However, his goal with probation was behavioral reform. He believed that if the system allowed the offender to stay within the community, they would get sort of a second chance. Then, by providing support and guidance from probation officers, the officers may in fact be able to reach the goal of assisting the offender in becoming a law-abiding individual. The word probation actually is a form of the Latin word probatio which mean to test or prove. The individuals who receive probation are called probationers. They are people who have been convicted of a crime and are given this sentence instead of going to jail. Probation officers are the people who supervise them. They are usually court-appointed and must make sure that their probationer follows the rules handed down to them by the court. Parole Parole was first used in Australia and Ireland. It was seen as an award for inmates who were on their best behavior. Parole is a privilege given to an individual when are eligible to parole. This happens after the prisoner receives a minimum or maximum sentence; then they become eligible with the decision of the parole board, which decides whether or not to put them on parole after a consideration hearing. Just like probation, this is a program that focuses on the rehabilitation of offenders and getting them back into the community and on the right track. Parole was first introduced in the United States by Brockway Zebulon in 1876 as a way to reduce jail overcrowding. Zebulon also saw this as way to rehabilitate offenders by encouraging them to exhibit good behavior while incarcerated. This allows offenders to be let back into their community after serving a portion of their jail time and live, but under supervision from a Parole Officer. The parole period is based on a decision made by the board of parole. If the offender violates their parole while out, they are then placed back into the prison system. Both Alexander Maconochie and Walter Crofton played important roles in the development of the parole program. Literature Review Probation Evidence of probation goes all the way back to the Middle Ages (Ditton and Ford 1994). During that time, the court systems practiced suspended sentences. The first courts in America allowed these suspended sentences, but not every court used this (Young 1976). All of this occurred before John Augustus idea of probation came about (Ditton and Ford 1994). John Augustus was a local businessman who asked judges to allow him to pay the fines for offenders who had been convicted of minor or non-violent crimes and then allow him to supervise them (Ditton and Ford 1994). After bailing these individuals out, he helped them find jobs and monitored their changes (Young 1976). When it was time for the offender to return to court, Augustus went along and provided the judge with a report on how the offender was progressing. (Ditton and Ford 1994; Young 1976) In 1978, thanks to the success of John Augustus, the first probation law was passed in Massachusetts (Ditton and Ford 1994). However, it wasnt until after Chicago established the first juvenile court that probation became a popular and useful sentencing method (Young 1976). In 1925, the National Probation Act was passed, which ultimately created a probation system for the federal government (Ditton and Ford 1994; Young 1976). By 1956, every state had some form of probation as a sentencing method (Ditton and Ford 1994; Young 1976). There are two main goals established by the probation program. The first is to protect society from additional crime by the offender (Ditton and Ford 1994). The achievement of this goal usually comes through the report of a presentence investigation that is done to determine whether or not the offender is a risk to society (Ditton and Ford 1994). If the information that comes from this report confirm that the offender is in fact not a risk to society then they are sentenced to probation. If the information confirms that the offender is a dangerous offender and may be harmful to their community, then they are usually sentenced to more harsh repercussions (Ditton and Ford 1994). The second goal is to help the offenders (Ditton and Ford 1994). This is done through supervision and management (Ditton and Ford 1994). Probation officers are there to basically watch over the probationers and make sure that they stay away from things that could cause them to reoffend. They also monitor their actions and help keep them from violation rules that have been set as a result of their probation. As far as managing goes, the probation officer is there to lead the offender in the way that they need to go in order not to offend again (Ditton and Ford 1994; Young 1976). They are there to help and ultimately provide the offender with the resources that they need. This actually includes helping them to find employment which is a requirement when on probation. If a probationer violate their probation orders they will have their probation revoked. Their violations fall under one of two types. The first is technical, which is usually defined by minor violations (Ditton and Ford 1994). The second is a re-arrest or new offense (Ditton and Ford 1994). This is serious violation of probation rules. Another offense committed by the offender shows that the individual is not likely to adhere to the probation rules and not prepared to cooperate. These individuals tend to have their probation revoked and end up back in the jail or prison facilities (Ditton and Ford 1994). Over the years, the number of probationers has fluctuated. From 1995 to 2004, the number of individuals on probation rose from 3,077,861 to 4,151,125. This is about a 0.2% change in 2004, the smallest annual growth rate since 1979. In twenty-one states, the adult probation population decreased with Washington State being the only one who saw a double digit decrease. Kentucky, Mississippi, New Mexico, and New Jersey were among the four states who saw an increase of more than 10% in probation population. Since 1990, probationers have accounted for about half the growth of the entire prison population. (Glaze and Palla 2005; Burrell 2005) As with anything, there are problems that occur with probation (Paparozzi and DeMichele 2008). When placed on probation, offenders are expected to follow the guidelines provided to them through the courts (Ditton and Ford 1994). However, we find that they dont always follow the rules and sometimes never get caught or charged. In 2004, in a certain area of Florida, 199,215 individuals were supposed to be on probation in particular month. About one of five offenders had disappeared; out of those left, close to one of four had an active violation report. Nothing was done because a judge stated that it would be hard to do something with each person that had violated their parole. Another problem with probation is that the officers experience heavy caseloads (Paparozzi and DeMichele 2008). They often have to pull overtime in order to keep up. Its hard for the officers to manage all their cases and be sure to keep up with supervising the offenders (Paparozzi and DeMichele 2008). This also tends to be an issue when it comes to parole officers. Parole The parole system goes back to the 1800s when Sir Walter Crofton introduced tickets of leave (Schuessler 1954). He used these to give to prisoners who experienced good behavior in exchange for an early release from prison. Crofton also introduced the idea of intermediate prisons (Schuessler 1954). Inmates could live and work in a supervised manner while carrying out their prison sentence (Schuessler 1954). As for the United States, Brockway Zebulon introduced the idea of the first parole system (Schuessler 1954). Zebulon used the help of volunteer community members to monitor the behavior of the inmates who were released. He wasnt focused on the help of police officers, as he believed they had enough on their plate. As time went on, he used the help of volunteer members who were concerned with the well-being of the individual. By the 1900s this idea had spread and become popular in every state except Virginia, Mississippi, and Florida. (Schuessler 1954; Dressler 1951; Abadinsky 1982) The parole board was established in 1902 (Schuessler 1954). This took the parolees out from under the control of the officers in prisons and allowed the parole board to define the rules and regulations for them (Abadinsky 1982). The board was made of three members; the deputy warden would sit in as the chair person (Abadinsky 1982). Prisoners would come before the board as their behavior was analyzed and the board would determine whether the convict deserved a parole (Schuessler 1954). The parole board established to manage paroles based on the convicts behavior (Virginia General Assembly 1992). However they also had to observe the convicts criminal history, prior supervision opportunities in the community, behavior in the prison during their jail time, and the convicts plans after being released (Abadinsky 1982). During this time, parole officers were introduced into the system. Their job was to monitor parolees once they are released from prison (Virginia General Assembly 1992). In 1910, inmates who were in any US prison received an automatic and equal chance to parole. No parole would be sentenced until the attorney general approves it. For prisoners who were sentenced to a life sentence would be able to go up for parole after 15 years. As a result of all of this, each prison had to hire a parole officer who would supervise the convict and help the parolees get a job. (Schuessler 1954; Dressler 1951; Abadinsky 1982) Within the time of being paroled, just like with probation, the parolee must abide by a set of rules (Schuessler 1954). The must meet with their parole officer at meetings established by the office. The must adhere to all other rules and regulations of being on parole. In the case of any new arrests, the parolee must report this to their parole officer (Schuessler 1954). If the parolee moves, they must make the parole officer aware. This also goes for any change in employment. During this time the officer cannot have any control substances in their possession nor be in the possession of a firearm (Schuessler 1954). Its also recommended that the parolee refrain from associating with individuals that may cause them to reoffend or could possibly get them in trouble in any way (Schuessler 1954). The number of individuals on parole went from 679,421 in 1995 to 765,355 in 2004. Therefore, the Nations parole population grew about 2.7%. This is a huge difference compared to the small growth of probation. A total of about ten states had double-digit increases in their parole population and as few as nine states saw decreases in their parole population. (Glaze and Palla 2005; Burrell 2005) There are numerous problems with the parole system (Paparozzi and DeMichele 2008; DeMichele and Payne 2007). One being the amount of caseload being given to parole officers (Schuessler 1954). The system seems to have a shortage of parole officers leading the ones that there are to have more cases, making it hard for them to keep control of what they have (Paparozzi and DeMichele 2008; DeMichele and Payne 2007). Another problem is the fact that if the individual is a reoffender, the chances of them reoffending is greater than those of a first-time offender (Schuessler 1954). This is true because the US has seen a high rate in recidivism over time. There is not much that can be done due to the lack of personnel. Probation and Parole Officers Basically, probation and parole officers serve the same duties. They are supposed to supervise and manage the offenders. This allows them to be case workers as well as law enforcers because they have to make sure the offenders dont break any laws. Some will argue that supervision is the most important aspect of the job. (DeMichele and Payne 2007) Probation and parole officer have several duties they must attend to. They conduct home visits, perform curfew checks and verify with the employer of the offender is actually employed. They also help the offender get into treatment facilities if they need it. Thats just a few of the duties that these officers accomplish. (Dressler 1951; Schuessler 1954) In order to became a probation or parole officer you must go through specialized training at a Peace Officer Standards and Training facility. Once this training is completed, they become POST certified peace officers. These officers must take part in quarterly training classes in a variety of areas concerning their job. Difference between probation and parole Most people think that probation and parole are the same thing. The have the same goal as to rehabilitate offenders, but they play two different roles. Probation is basically an extension to the offenders sentence, while parole is a reward given to prisoners for good behavior (Dressler 1951). Parole lessens the amount of time the individuals serves in prison (Dressler 1951). Probation is a sentence handed directly to the offender from the judge, but a parole board is in charge of the decision to grant an offender with parole (Dressler 1951). When it comes to parole, the judge has no say, the decision is left up to the parole board in the prison facility (Dressler 1951; Abadinsky 1982). Parolees are eligible for parole after they have served the minimum prison sentence that has been handed down to them (Abadinsky 1982). The board at this point determines whether or not the individual receives parole (Dressler 1951). As far as probation goes, this is based on the judges decision after determining the seriousness of the crime and whether or not the individual is likely to reoffend within the probationary period (Dressler 1951). Society on Probation and Parole Those within the community have mixed reactions about these programs. Most feel as if it is a good thing to try and rehabilitate these offenders. However, they are unsure how they feel about this individuals having contact within the community. They feel as if these individuals have already offended, that there is not much to keep them from offending again. As far as offenders are concerned, those who serve jail time are able sort of network within the prison walls. They develop these relationships with other prisoners that lead them back where they began. These relationships allow them to establish other relationships out in the community with other criminals or deviant individuals. This is not the case all the time, but for a majority of the time, this is the case. Some members of society realize this and begin to worry what could come of these relationships and networks that have been made. When an offender is released back into society, they have to learn how to control what happens as a result of being labeled. As an offender enters the prison system, they become labeled as an offender. This label then makes it hard for them to find employment, as well as make changes that lead and keep them on the right path. There are individuals who are willing to help these offenders, but most fear their past. This is when the help of the parole or probation officer comes into play. Its their job to help these individual get jobs or get into rehab or even continue with their education. More than likely, if an offender reoffends, its because they are unable to establish a place in society that keeps them busy. Idle hands are the devils workshop which means anyone who has free time to waste is more likely to offend than someone who is constantly doing something. Conclusion The jobs of being a probation or parole officer is not easy. On a day to day basis they have to deal with keeping track and supervising individual, as well as possibly receiving more individuals. Their job is already hard enough with making sure their probationers and parolees are following the rules, but when you have multiple things tend to get tricky. These officers are underappreciated. They are also often taken advantage of. These people come into these positions to help people. Thats why they choose this career, to try and make a difference in ones life. These two programs are very useful within our correction system. They provide for means of rehabilitation just as their founders wished they would. They also save tax payers a great deal of money. Prison overcrowding cause the tax payers of America to have to fork over more money to support the funding of prison and jail facilities. With probation and parole programs having been founded, we are able to save money and alleviate the crowding in these correctional facilities. Although they are not all fail proof, they do help.

coaching tips :: essays research papers

The Coaching Tip WHO doesn't want to accomplish more in life? Don't most of us want more time? More money? More love? More satisfaction? Yet, isn't our tendency to go for it rather than simply having it all come to us? A strong personal foundation includes 10 distinct stepping stones which, when linked together, provide a solid yet personalized base on which to build one's life. And, in a world which sometimes appears to be built on quicksand, we all need a personal foundation on which to depend. These 10 stepping stones of a Personal Foundation are: A past which you have fully completed. A life which is based fully on integrity. Needs which have been identified and fully met. Boundaries which are ample and automatic. Standards which bring out your best. An absence of tolerations. Choosing to come from a positive place. A family which nurtures you. A community which develops you. A life fully oriented around your true values. Anyone who is living a meaningful life must have a strong personal foundation so they can afford to look up at the stars instead of down at their feet. Having a strong personal foundation allows a person to fully use their skills and resources, because instead of constantly worrying about the fundamentals of their life, they are free to focus on the task at hand. The process of building a personal foundation also teaches a person how to eliminate and prevent many common problems that are usually thought of as an expected part of life." Where can you go for help in this area? A Master Coach is uniquely trained to help clients strengthen their own foundation, and is a model of how well the process works.

Street Light

INDEX |S.NO |TITLE |PAGE NO | |1 |Introduction |1 | |2 |Solar Energy |4 | |3 |Photovoltaics |24 | |4 |Solar Cell |28 | |5 |Solar Roadway |51 | |6 |Component description |55 | |7 |Working of Project |82 | |8 |Conclusion |86 | |9 |Images |91 | |10 |Bibliography |93 | INTRODUCTION INTRODUCTION: Solar energy, radiant light and heat from the sun, has been harnessed by humans since ancient times using a range of ever-evolving technologies.Solar energy technologies include solar heating, solar photovoltaics, solar thermal electricity and solar architecture, which can make considerable contributions to solving some of the most urgent energy problems the world now faces. Solar power is the conversion of sunlight into electricity, either directly using photovoltaic (PV), or indirectly using concentrated solar power (CSP). Concentrated solar power systems use lenses or mirrors and tracking systems to focus a large area of sunlight into a small beam. Photovoltaics convert light into electric cur rent using the photoelectric effect. A Street light, lamppost, street lamp, light standard, or lamp standard is a raised source of light on the edge of a road or walkway, which is turned on or lit at a certain time every night.Modern lamps may also have light-sensitive photocells to turn them on at dusk, off at dawn, or activate automatically in dark weather. In older lighting this function would have been performed with the aid of a solar dial. It is not uncommon for street lights to be on posts which have wires strung between them; such as on telephone poles or utility poles. New street lighting technologies, such as LED or induction lights, emit a white light that provides high levels of scotopic lumens allowing street lights with lower wattages and lower photopic lumens to replace existing street lights. Photovoltaic-powered LED luminaires are gaining wider acceptance.Preliminary field tests show that some LED luminaires are energy-efficient and perform well in testing environme nts. This project is a LED based Solar Lights is an automatic street lightening system using a LDR and 6V/5W solar panel. During day time, the internal rechargeable battery receives charging current from the connected solar panel. Here IC 555 is wired as a medium current inverting line driver, switched by an encapsulated light detector (LDR). When ambient light dims, the circuits drive the white LEDs. When the ambient light level restores, circuit returns to its idle state and light(s) switched off by the circuit. Block Diagram: SOLAR ENERGY SOLAR ENERGYSolar energy, radiant light and heat from the sun, has been harnessed by humans since ancient times using a range of ever-evolving technologies. Solar energy technologies include solar heating, solar photovoltaics, solar thermal electricity, solar architecture and artificial photosynthesis, which can make considerable contributions to solving some of the most urgent energy problems the world now faces. Solar technologies are broadly characterized as either passive solar or active solar depending on the way they capture, convert and distribute solar energy. Active solar techniques include the use of photovoltaic panels and solar thermal collectors to harness the energy.Passive solar techniques include orienting a building to the Sun, selecting materials with favorable thermal mass or light dispersing properties, and designing spaces that naturally circulate air. In 2011, the International Energy Agency said that â€Å"the development of affordable, inexhaustible and clean solar energy technologies will have huge longer-term benefits. It will increase countries’ energy security through reliance on an indigenous, inexhaustible and mostly import-independent resource, enhance sustainability, reduce pollution, lower the costs of mitigating climate change, and keep fossil fuel prices lower than otherwise. These advantages are global.Hence the additional costs of the incentives for early deployment should be co nsidered learning investments; they must be wisely spent and need to be widely shared†. The Earth receives 174 petawatts (PW) of incoming solar radiation (insolation) at the upper atmosphere. Approximately 30% is reflected back to space while the rest is absorbed by clouds, oceans and land masses. The spectrum of solar light at the Earth's surface is mostly spread across the visible and near-infrared ranges with a small part in the near-ultraviolet. Earth's land surface, oceans and atmosphere absorb solar radiation, and this raises their temperature. Warm air containing evaporated water from the oceans rises, causing atmospheric circulation or convection.When the air reaches a high altitude, where the temperature is low, water vapor condenses into clouds, which rain onto the Earth's surface, completing the water cycle. The latent heat of water condensation amplifies convection, producing atmospheric phenomena such as wind, cyclones and anti-cyclones. Sunlight absorbed by the o ceans and land masses keeps the surface at an average temperature of 14  °C. By photosynthesis green plants convert solar energy into chemical energy, which produces food, wood and the biomass from which fossil fuels are derived. The total solar energy absorbed by Earth's atmosphere, oceans and land masses is approximately 3,850,000 exajoules (EJ) per year. In 2002, this was more energy in one hour than the world used in one year.Photosynthesis captures approximately 3,000 EJ per year in biomass. The technical potential available from biomass is from 100–300 EJ/year. The amount of solar energy reaching the surface of the planet is so vast that in one year it is about twice as much as will ever be obtained from all of the Earth's non-renewable resources of coal, oil, natural gas, and mined uranium combined. Solar energy can be harnessed at different levels around the world, mostly depending on distance from the equator. [pic] Average insolation showing land area (small black dots) required to replace the world primary energy supply with solar electricity. 18 TW is 568 Exajoule (EJ) per year.Insolation for most people is from 150 to 300 W/m2 or 3. 5 to 7. 0 kWh/m2/day. Solar energy refers primarily to the use of solar radiation for practical ends. However, all renewable energies, other than geothermal and tidal, derive their energy from the sun. Solar technologies are broadly characterized as either passive or active depending on the way they capture, convert and distribute sunlight. Active solar techniques use photovoltaic panels, pumps, and fans to convert sunlight into useful outputs. Passive solar techniques include selecting materials with favorable thermal properties, designing spaces that naturally circulate air, and referencing the position of a building to the Sun.Active solar technologies increase the supply of energy and are considered supply side technologies, while passive solar technologies reduce the need for alternate resources and are g enerally considered demand side technologies. APPLICATIONS OF SOLAR TECHNOLOGY Average  insolation  showing land area (small black dots) required to replace the world primary energy supply with solar electricity. 18 TW is 568 Exajoule (EJ) per year. Insolation for most people is from 150 to 300 W/m2  or 3. 5 to 7. 0 kWh/m2/day. Solar energy refers primarily to the use of  solar radiation  for practical ends. However, all renewable energies, other than  geothermal  and  tidal, derive their energy from the sun. Solar technologies are broadly characterized as either passive or active depending on the way they capture, convert and distribute sunlight.Active solar techniques use photovoltaic panels, pumps, and fans to convert sunlight into useful outputs. Passive solar techniques include selecting materials with favorable thermal properties, designing spaces that naturally circulate air, and referencing the position of a building to the Sun. Active solar technologies incr ease the supply of energy and are considered  supply side technologies, while passive solar technologies reduce the need for alternate resources and are generally considered demand side technologies ARCHITECTURE AND URBAN PLANNING [pic] Darmstadt University of Technology  in Germany  won the 2007  Solar Decathlon  in Washington, D. C. with this  passive house designed specifically for the humid and hot subtropical climate.Sunlight has influenced building design since the beginning of architectural history. Advanced solar architecture and urban planning methods were first employed by the  Greeks  and  Chinese, who oriented their buildings toward the south to provide light and warmth. The common features of  passive solar  architecture are orientation relative to the Sun, compact proportion (a low surface area to volume ratio), selective shading (overhangs) and  thermal mass. When these features are tailored to the local climate and environment they can produce well-lit spaces that stay in a comfortable temperature range. Socrates'  Megaron House is a classic example of passive solar design.The most recent approaches to solar design use computer modeling tying together  solar lighting,  heating  and  ventilation  systems in an integrated  solar design  package. Active solar equipment such as pumps, fans and switchable windows can complement passive design and improve system performance. Urban heat islands (UHI) are metropolitan areas with higher temperatures than that of the surrounding environment. The higher temperatures are a result of increased absorption of the Solar light by urban materials such as asphalt and concrete, which have lower  albedos  and higher  heat capacities  than those in the natural environment. A straightforward method of counteracting the UHI effect is to paint buildings and roads white and plant trees.Using these methods, a hypothetical â€Å"cool communities† program in  Los Ang eles  has projected that urban temperatures could be reduced by approximately 3  Ã‚ °C at an estimated cost of US$1  billion, giving estimated total annual benefits of US$530  million from reduced air-conditioning costs and healthcare savings. [23] AGRICULTURE AND HORTICULTURE [pic] Greenhouses  like these in the Westland municipality of the  Netherlands  grow vegetables, fruits and flowers. Agriculture  and  horticulture  seek to optimize the capture of solar energy in order to optimize the productivity of plants. Techniques such as timed planting cycles, tailored row orientation, staggered heights between rows and the mixing of plant varieties can improve crop yields. [24][25]  While sunlight is generally considered a plentiful resource, the exceptions highlight the importance of solar energy to agriculture.During the short growing seasons of the  Little Ice Age, French and  English  farmers employed fruit walls to maximize the collection of solar energ y. These walls acted as thermal masses and accelerated ripening by keeping plants warm. Early fruit walls were built perpendicular to the ground and facing south, but over time, sloping walls were developed to make better use of sunlight. In 1699,  Nicolas Fatio de Duillier  even suggested using a  tracking mechanism  which could pivot to follow the Sun. [26]  Applications of solar energy in agriculture aside from growing crops include pumping water, drying crops, brooding chicks and drying chicken manure. [27][28]  More recently the technology has been embraced by vinters, who use the energy generated by solar panels to power grape presses. [29]Greenhouses  convert solar light to heat, enabling year-round production and the growth (in enclosed environments) of specialty crops and other plants not naturally suited to the local climate. Primitive greenhouses were first used during Roman times to produce  cucumbers  year-round for the Roman emperor  Tiberius. [30]à ‚  The first modern greenhouses were built in Europe in the 16th century to keep exotic plants brought back from explorations abroad. [31]  Greenhouses remain an important part of horticulture today, and plastic transparent materials have also been used to similar effect in  polytunnels  and  row covers. TRANSPORT AND RECONNAISSANCE [pic] Australia hosts the  World Solar Challengewhere solar cars like the Nuna3 race through a 3,021  km (1,877  mi) course from Darwin to Adelaide.Development of a solar powered car has been an engineering goal since the 1980s. The  World Solar Challenge  is a biannual solar-powered car race, where teams from universities and enterprises compete over 3,021 kilometres (1,877  mi) across central Australia from  Darwin  to  Adelaide. In 1987, when it was founded, the winner's average speed was 67 kilometres per hour (42  mph) and by 2007 the winner's average speed had improved to 90. 87 kilometres per hour (56. 46  mph). [32]à ‚  The  North American Solar Challenge  and the planned  South African Solar Challenge  are comparable competitions that reflect an international interest in the engineering and development of solar powered vehicles. [33][34]Some vehicles use solar panels for auxiliary power, such as for air conditioning, to keep the interior cool, thus reducing fuel consumption. [35][36] In 1975, the first practical solar boat was constructed in England. [37]  By 1995, passenger boats incorporating PV panels began appearing and are now used extensively. [38]  In 1996,  Kenichi Horie  made the first solar powered crossing of the Pacific Ocean, and the  sun21  catamaran made the first solar powered crossing of the Atlantic Ocean in the winter of 2006–2007. [39]  There are plans to circumnavigate the globe in 2010. [40] [pic] Helios UAV  in solar powered flight. In 1974, the unmanned  AstroFlight Sunrise  plane made the first solar flight.On 29 April 1979, the  Sol ar Riser  made the first flight in a solar powered, fully controlled, man carrying flying machine, reaching an altitude of 40 feet (12  m). In 1980, the  Gossamer Penguin  made the first piloted flights powered solely by photovoltaics. This was quickly followed by the  Solar Challenger  which crossed the English Channel in July 1981. In 1990  Eric Scott Raymond  in 21 hops flew from California to North Carolina using solar power. [41]  Developments then turned back to unmanned aerial vehicles (UAV) with the  Pathfinder  (1997) and subsequent designs, culminating in the  Helios  which set the altitude record for a non-rocket-propelled aircraft at 29,524 metres (96,864  ft) in 2001. 42]  The  Zephyr, developed by  BAE Systems, is the latest in a line of record-breaking solar aircraft, making a 54-hour flight in 2007, and month-long flights are envisioned by 2010. [43] A  solar balloon  is a black balloon that is filled with ordinary air. As sunlig ht shines on the balloon, the air inside is heated and expands causing an upward  buoyancy  force, much like an artificially heated  hot air balloon. Some solar balloons are large enough for human flight, but usage is generally limited to the toy market as the surface-area to payload-weight ratio is relatively high. [44] DAYLIGHTING [pic] Daylighting features such as this  oculusat the top of the  Pantheon, in  Rome, Italy have been in use since antiquity.The history of lighting is dominated by the use of natural light. The Romans recognized a  right to light  as early as the  6th century  and English law echoed these judgments with the Prescription Act of 1832. [45][46]  In the 20th century artificial  lighting  became the main source of interior illumination but daylighting techniques and hybrid solar lighting solutions are ways to reduce energy consumption. Daylighting  systems collect and distribute sunlight to provide interior illumination. This pass ive technology directly offsets energy use by replacing artificial lighting, and indirectly offsets non-solar energy use by reducing the need for  air-conditioning. 47]  Although difficult to quantify, the use of  natural lighting  also offers physiological and psychological benefits compared to  artificial lighting. [47]  Daylighting design implies careful selection of window types, sizes and orientation; exterior shading devices may be considered as well. Deciduous trees at the east and west ends of buildings offer shade in the summer and do not block the sun in the winter. [48]  Individual features include sawtooth roofs,  clerestory windows, light shelves,  skylights  and  light tubes. They may be incorporated into existing structures, but are most effective when integrated into a  solar design  package that accounts for factors such as  glare, heat flux and  time-of-use.When daylighting features are properly implemented they can reduce lighting-rel ated energy requirements by 25%. [49] Hybrid solar lighting  (HSL) is an  active solar  method of providing interior illumination. HSL systems collect sunlight using focusing mirrors that  track the Sun  and use  optical fibers  to transmit it inside the building to supplement conventional lighting. In single-story applications these systems are able to transmit 50% of the direct sunlight received. [50] Solar lights that charge during the day and light up at dusk are a common sight along walkways. [51]  Solar-charged lanterns have become popular in developing countries where they provide a safer and cheaper alternative to kerosene lamps. [52]Although  daylight saving time  is promoted as a way to use sunlight to save energy, recent research reports contradictory results: several studies report savings, but just as many suggest no effect or even a net loss, particularly when  gasoline  consumption is taken into account. Electricity use is greatly affected by g eography, climate and economics, making it hard to generalize from single studies. [53] SOLAR THERMAL Solar thermal technologies can be used for water heating, space heating, space cooling and process heat generation. [54] WATER HEATING [pic] Solar water heaters facing the  Sun  to maximize gain. Solar hot water systems use sunlight to heat water.In low geographical latitudes (below 40  degrees) from 60 to 70% of the domestic hot water use with temperatures up to 60  Ã‚ °C can be provided by solar heating systems. [55]  The most common types of solar water heaters are evacuated tube collectors (44%) and glazed flat plate collectors (34%) generally used for domestic hot water; and unglazed plastic collectors (21%) used mainly to heat swimming pools. [56] As of 2007, the total installed capacity of solar hot water systems is approximately 154  GW. [57]  China is the world leader in their deployment with 70  GW installed as of 2006 and a long term goal of 210  GW by 2 020. [58]  Israel  and  Cyprus  are the per capita leaders in the use of solar hot water systems with over 90% of homes using them. 59]  In the United States, Canada and Australia heating swimming pools is the dominant application of solar hot water with an installed capacity of 18  GW as of 2005. [18] HEATING, COOLING AND VENTILATION [pic] Solar House #1 of  Massachusetts Institute of Technology  in the United States, built in 1939, used  Seasonal thermal energy storage (STES)  for year-round heating. In the United States,  heating, ventilation and air conditioning  (HVAC) systems account for 30% (4. 65  EJ) of the energy used in commercial buildings and nearly 50% (10. 1  EJ) of the energy used in residential buildings. [49][60]  Solar heating, cooling and ventilation technologies can be used to offset a portion of this energy.Thermal mass is any material that can be used to store heat—heat from the Sun in the case of solar energy. Common therm al mass materials include stone, cement and water. Historically they have been used in arid climates or warm temperate regions to keep buildings cool by absorbing solar energy during the day and radiating stored heat to the cooler atmosphere at night. However they can be used in cold temperate areas to maintain warmth as well. The size and placement of thermal mass depend on several factors such as climate, daylighting and shading conditions. When properly incorporated, thermal mass maintains space temperatures in a comfortable range and reduces the need for auxiliary heating and cooling equipment. [61]A solar chimney (or thermal chimney, in this context) is a passive solar ventilation system composed of a vertical shaft connecting the interior and exterior of a building. As the chimney warms, the air inside is heated causing an  updraft  that pulls air through the building. Performance can be improved by using glazing and thermal mass materials[62]  in a way that mimics green houses. Deciduous  trees and plants have been promoted as a means of controlling solar heating and cooling. When planted on the southern side of a building, their leaves provide shade during the summer, while the bare limbs allow light to pass during the winter. [63]  Since bare, leafless trees shade 1/3 to 1/2 of incident solar radiation, there is a balance between the benefits of summer shading and the corresponding loss of winter heating. 64]  In climates with significant heating loads, deciduous trees should not be planted on the southern side of a building because they will interfere with winter solar availability. They can, however, be used on the east and west sides to provide a degree of summer shading without appreciably affecting winter solar gain. [65] WATER TREATMENT [pic] Solar water disinfection  in  Indonesia [pic] Small scale solar powered sewerage treatment plant. Solar distillation can be used to make  saline  or  brackish water  potable. The firs t recorded instance of this was by 16th century Arab alchemists. [66]  A large-scale solar distillation project was first constructed in 1872 in the  Chilean  mining town of Las Salinas. 67]  The plant, which had solar collection area of 4,700  m2, could produce up to 22,700  L  per day and operated for 40  years. [67]  Individual  still  designs include single-slope, double-slope (or greenhouse type), vertical, conical, inverted absorber, multi-wick, and multiple effect. [66]  These stills can operate in passive, active, or hybrid modes. Double-slope stills are the most economical for decentralized domestic purposes, while active multiple effect units are more suitable for large-scale applications. [66] Solar water  disinfection  (SODIS) involves exposing water-filled plastic  polyethylene terephthalate  (PET) bottles to sunlight for several hours. 68]  Exposure times vary depending on weather and climate from a minimum of six hours to two days dur ing fully overcast conditions. [69]  It is recommended by theWorld Health Organization  as a viable method for household water treatment and safe storage. [70]  Over two million people in developing countries use this method for their daily drinking water. [69] Solar energy may be used in a water stabilisation pond to treat  waste water  without chemicals or electricity. A further environmental advantage is thatalgae  grow in such ponds and consume  carbon dioxide  in photosynthesis, although algae may produce toxic chemicals that make the water unusable. [71][72] COOKING [pic]The Solar Bowl in  Auroville,  India, concentrates sunlight on a movable receiver to produce  steam  for  cooking. Solar cookers use sunlight for cooking, drying and  pasteurization. They can be grouped into three broad categories: box cookers, panel cookers and reflector cookers. [73]  The simplest solar cooker is the box cooker first built by  Horace de Saussure  in 1767. [7 4]  A basic box cooker consists of an insulated container with a transparent lid. It can be used effectively with partially overcast skies and will typically reach temperatures of 90–150  Ã‚ °C. [75]Panel cookers use a reflective panel to direct sunlight onto an insulated container and reach temperatures comparable to box cookers.Reflector cookers use various concentrating geometries (dish, trough, Fresnel mirrors) to focus light on a cooking container. These cookers reach temperatures of 315  Ã‚ °C and above but require direct light to function properly and must be repositioned to track the Sun. [76] The  solar bowl  is a concentrating technology employed by the Solar Kitchen at  Auroville, in  Tamil Nadu,  India, where a stationary spherical reflector focuses light along a line perpendicular to the sphere's interior surface, and a computer control system moves the receiver to intersect this line. Steam is produced in the receiver at temperatures reaching 150   Ã‚ °C and then used for process heat in the kitchen. [77]A reflector developed by  Wolfgang Scheffler  in 1986 is used in many solar kitchens. Scheffler reflectors are flexible parabolic dishes that combine aspects of trough and power tower concentrators. Polar tracking  is used to follow the Sun's daily course and the curvature of the reflector is adjusted for seasonal variations in the incident angle of sunlight. These reflectors can reach temperatures of 450–650  Ã‚ °C and have a fixed focal point, which simplifies cooking. [78]  The world's largest Scheffler reflector system in Abu Road,  Rajasthan, India is capable of cooking up to 35,000 meals a day. [79]As of 2008, over 2,000 large Scheffler cookers had been built worldwide. [80] PROCESS HEATSolar concentrating technologies such as parabolic dish, trough and Scheffler reflectors can provide process heat for commercial and industrial applications. The first commercial system was the  Solar Total Energy Project  (STEP) in Shenandoah, Georgia, USA where a field of 114 parabolic dishes provided 50% of the process heating, air conditioning and electrical requirements for a clothing factory. This grid-connected cogeneration system provided 400  kW of electricity plus thermal energy in the form of 401  kW steam and 468  kW chilled water, and had a one hour peak load thermal storage. [81] Evaporation ponds are shallow pools that concentrate dissolved solids through  evaporation. The use of evaporation ponds to obtain salt from sea water is one of the oldest applications of solar energy.Modern uses include concentrating brine solutions used in leach mining and removing dissolved solids from waste streams. [82] Clothes lines,  clotheshorses, and clothes racks dry clothes through evaporation by wind and sunlight without consuming electricity or gas. In some states of the United States legislation protects the â€Å"right to dry† clothes. [83] Unglazed transpired collecto rs (UTC) are perforated sun-facing walls used for preheating ventilation air. UTCs can raise the incoming air temperature up to 22  Ã‚ °C and deliver outlet temperatures of 45–60  Ã‚ °C. [84]  The short payback period of transpired collectors (3 to 12  years) makes them a more cost-effective alternative than glazed collection systems. 84]  As of 2003, over 80 systems with a combined collector area of 35,000  m2  had been installed worldwide, including an 860  m2  collector in  Costa Rica  used for drying coffee beans and a 1,300  m2  collector in  Coimbatore, India used for drying marigolds. [28] ELECTRICITY PRODUCTION [pic] The  PS10  concentrates sunlight from a field of heliostats on a central tower. Solar power is the conversion of sunlight into  electricity, either directly using  photovoltaics  (PV), or indirectly using  concentrated solar power  (CSP). CSP systems use lenses or mirrors and tracking systems to focus a large area of sunlight into a small beam. PV converts light into electric current using the  photoelectric effect. Commercial CSP plants were first developed in the 1980s. Since 1985 the eventually 354 MW  SEGS  CSP installation, in the Mojave Desert of California, is the largest solar power plant in the world.Other large CSP plants include the 150 MW  Solnova Solar Power Station  and the 100 MWAndasol solar power station, both in Spain. The 250 MW  Agua Caliente Solar Project, in the United States, and the 214 MW  Charanka Solar Park  inIndia, are the  world’s largest  photovoltaic plants. Solar projects exceeding 1 GW are being developed, but most of the deployed photovoltaics are in small rooftop arrays of less than 5 kW, which are grid connected using net metering and/or a feed-in tariff. [85] Concentrated solar power Concentrating Solar Power (CSP) systems use lenses or mirrors and tracking systems to focus a large area of sunlight into a small beam. The concen trated heat is then used as a heat source for a conventional power plant.A wide range of concentrating technologies exists; the most developed are the parabolic trough, the concentrating linear fresnel reflector, the Stirling dish and the solar power tower. Various techniques are used to track the Sun and focus light. In all of these systems a  working fluid  is heated by the concentrated sunlight, and is then used for power generation or energy storage. [86] PHOTOVOLTAICS PHOTOVOLTAICS A solar cell, or photovoltaic cell (PV), is a device that converts light into electric current using the photoelectric effect. The first solar cell was constructed by Charles Fritts in the 1880s. In 1931 a German engineer, Dr Bruno Lange, developed a photo cell using silver selenite in place of copper oxide.Although the prototype selenium cells converted less than 1% of incident light into electricity, both Ernst Werner von Siemens and James Clerk Maxwell recognized the importance of this discove ry. Following the work of Russell Ohl in the 1940s, researchers Gerald Pearson, Calvin Fuller and Daryl Chapin created the silicon solar cell in 1954. These early solar cells cost 286 USD/watt and reached efficiencies of 4. 5–6%. By 2012 available efficiencies exceed 20% and the maximum efficiency of research photovoltaics is over 40%. OTHERS Besides concentrated solar power and photovoltaics, there are some other techniques used to generated electricity using solar power. These include: †¢Dye-sensitized_solar_cells, Luminescent solar concentrators (a type of concentrated photovoltaics or CPV technology), †¢Biohybrid solar cells, †¢Photon Enhanced Thermionic Emission systems. Development, deployment and economics Beginning with the surge in coal use which accompanied the Industrial Revolution, energy consumption has steadily transitioned from wood and biomass to fossil fuels. The early development of solar technologies starting in the 1860s was driven by an exp ectation that coal would soon become scarce. However development of solar technologies stagnated in the early 20th century in the face of the increasing availability, economy, and utility of coal and petroleum. [109]The 1973 oil embargo and 1979 energy crisis caused a reorganization of energy policies around the world and brought renewed attention to developing solar technologies. Deployment strategies focused on incentive programs such as the Federal Photovoltaic Utilization Program in the US and the Sunshine Program in Japan. Other efforts included the formation of research facilities in the US (SERI, now NREL), Japan (NEDO), and Germany (Fraunhofer Institute for Solar Energy Systems ISE). Commercial solar water heaters began appearing in the United States in the 1890s. These systems saw increasing use until the 1920s but were gradually replaced by cheaper and more reliable heating fuels.As with photovoltaics, solar water heating attracted renewed attention as a result of the oil crises in the 1970s but interest subsided in the 1980s due to falling petroleum prices. Development in the solar water heating sector progressed steadily throughout the 1990s and growth rates have averaged 20% per year since 1999. [57] Although generally underestimated, solar water heating and cooling is by far the most widely deployed solar technology with an estimated capacity of 154 GW as of 2007. The International Energy Agency has said that solar energy can make considerable contributions to solving some of the most urgent problems the world now faces: The development of affordable, inexhaustible and clean solar energy technologies will have huge longer-term benefits.It will increase countries’ energy security through reliance on an indigenous, inexhaustible and mostly import-independent resource, enhance sustainability, reduce pollution, lower the costs of mitigating climate change, and keep fossil fuel prices lower than otherwise. These advantages are global. Hence the additional costs of the incentives for early deployment should be considered learning investments; they must be wisely spent and need to be widely shared. In 2011, the International Energy Agency said that solar energy technologies such as photovoltaic panels, solar water heaters and power stations built with mirrors could provide a third of the world’s energy by 2060 if politicians commit to limiting climate change. The energy from the sun could play a key role in de-carbonizing the global economy alongside improvements in energy efficiency and imposing costs on greenhouse gas emitters. The strength of solar is the incredible variety and flexibility of applications, from small scale to big scale†. We have proved †¦ that after our stores of oil and coal are exhausted the human race can receive unlimited power from the rays of the sun. —Frank Shuman, New York Times, July 2, 1916 SOLAR CELL SOLAR CELL A solar cell made from amonocrystalline silicon wafer Sola r cells can be used devices such as this portable monocrystalline solar charger. A solar cell (also called a photovoltaic cell) is an electrical device that converts the energy of light directly into electricity by the photovoltaic effect. It is a form of photoelectric cell (in that its electrical characteristics—e. g. urrent, voltage, or resistance—vary when light is incident upon it) which, when exposed to light, can generate and support an electric current without being attached to any external voltage source. The term â€Å"photovoltaic† comes from the Greek (phos) meaning â€Å"light†, and from â€Å"Volt†, the unit of electro-motive force, the volt, which in turn comes from the last name of the Italian physicist Alessandro Volta, inventor of the battery (electrochemical cell). The term â€Å"photo-voltaic† has been in use in English since 1849. Photovoltaics is the field of technology and research related to the practical application of photovoltaic cells in producing electricity from light, though it is often used specifically to refer to the generation of electricity from sunlight.Cells can be described as photovoltaic even when the light source is not necessarily sunlight (lamplight, artificial light, etc. ). In such cases the cell is sometimes used as a photodetector (for example infrared detectors), detecting light or other electromagnetic radiationnear the visible range, or measuring light intensity. The operation of a photovoltaic (PV) cell requires 3 basic attributes: 1. The absorption of light, generating either electron-hole pairs or excitons. 2. The separation of charge carriers of opposite types. 3. The separate extraction of those carriers to an external circuit. In contrast, a solar thermal collector collects heat by absorbing sunlight, for the purpose of either direct heating or indirect electrical power generation. Photoelectrolytic cell† (photoelectrochemical cell), on the other hand, refe rs either a type of photovoltaic cell (like that developed by A. E. Becquerel and modern dye-sensitized solar cells) or a device that splits water directly into hydrogen and oxygen using only solar illumination. FURTHER IMPROVEMENTS In the time since Berman's work, improvements have brought production costs down under $1 a watt, with wholesale costs well under $2. â€Å"Balance of system† costs are now more than the panels themselves. Large commercial arrays can be built at below $3. 40 a watt,[12][13]  fully commissioned. As the semiconductor industry moved to ever-larger boules, older equipment became available at fire-sale prices.Cells have grown in size as older equipment became available on the surplus market; ARCO Solar's original panels used cells with 2 to 4  inch (51 to 100  mm) diameter. Panels in the 1990s and early 2000s generally used 5  inch (125  mm) wafers, and since 2008 almost all new panels use 6  inch (150  mm) cells. This material has less e fficiency, but is less expensive to produce in bulk. The widespread introduction of  flat screen televisions  in the late 1990s and early 2000s led to the wide availability of large sheets of high-quality glass, used on the front of the panels. In terms of the cells themselves, there has been only one major change. During the 1990s, polysilicon cells became increasingly popular.These cells offer less efficiency than their monosilicon counterparts, but they are grown in large vats that greatly reduce the cost of production. By the mid-2000s, poly was dominant in the low-cost panel market, but more recently a variety of factors has pushed the higher performance mono back into widespread use. CURRENT EVENTS Other technologies have tried to enter the market. First Solar  was briefly the largest panel manufacturer in 2009, in terms of yearly power produced, using a thin-film cell sandwiched between two layers of glass. Since then silicon panels reasserted their dominant position bo th in terms of lower prices and the rapid rise of Chinese manufacturing, resulting in the top producers being Chinese.By late 2011, efficient production in China, coupled with a drop in European demand due to budgetary turmoil had dropped prices for crystalline solar-based modules further, to about $1. 09[13]  per watt in October 2011, down sharply from the price per watt in 2010. A more modern process, mono-like-multi, aims to offer the performance of mono at the cost of poly, and is in the process of being introduced in 2012[citation needed]. APPLICATIONS [pic] Polycrystalline  photovoltaic cells laminated to backing material in a module [pic] [pic] Polycrystalline photovoltaic cells Solar cells are often electrically connected and encapsulated as a  module. Photovoltaic modules often have a sheet of glass on the front (sun up) side, allowing light to pass while protecting the emiconductor  wafers  from abrasion and impact due to wind-driven debris,  rain,  hail, etc . Solar cells are also usually connected in  series  in modules, creating an additive  voltage. Connecting cells in parallel will yield a higher current; however, very significant problems exist with parallel connections. For example, shadow effects can shut down the weaker (less illuminated) parallel string (a number of series connected cells) causing substantial power loss and even damaging the weaker string because of the excessive  reverse bias  applied to the shadowed cells by their illuminated partners. Strings of series cells are usually handled independently and not connected in parallel, special paralleling circuits are the exceptions.Although modules can be interconnected to create an  array  with the desired peak DC voltage and loading current capacity, using independent MPPTs (maximum power point trackers) provides a better solution. In the absence of paralleling circuits, shunt diodes can be used to reduce the power loss due to shadowing in arrays with ser ies/parallel connected cells. To make practical use of the solar-generated energy, the electricity is most often fed into the electricity grid using inverters (grid-connected  photovoltaic systems); in stand-alone systems, batteries are used to store the energy that is not needed immediately. Solar panels can be used to power or recharge portable devices. THEORYThe solar cell works in three steps: 1. Photons  in  sunlight  hit the solar panel and are absorbed by semiconducting materials, such as silicon. 2. Electrons  (negatively charged) are knocked loose from their atoms, causing an electric potential difference. Current starts flowing through the material to cancel the potential and this electricity is captured. Due to the special composition of solar cells, the electrons are only allowed to move in a single direction. 3. An array of solar cells converts solar energy into a usable amount of  direct current  (DC) electricity. EFFICIENCY Solar panels on the Internatio nal Space Station absorb light from both sides.These Bifacial cells are more efficient and operate at lower temperature than single sided equivalents. The efficiency of a solar cell may be broken down into reflectance efficiency, thermodynamic efficiency, charge carrier separation efficiency and conductive efficiency. The overall efficiency is the product of each of these individual efficiencies. A solar cell usually has a voltage dependent efficiency curve, temperature coefficients, and shadow angles. Due to the difficulty in measuring these parameters directly, other parameters are measured instead: thermodynamic efficiency, quantum efficiency,integrated quantum efficiency, VOC ratio, and fill factor.Reflectance losses are a portion of the quantum efficiency under â€Å"external quantum efficiency†. Recombination losses make up a portion of the quantum efficiency, VOC ratio, and fill factor. Resistive losses are predominantly categorized under fill factor, but also make up minor portions of the quantum efficiency, VOC ratio. The fill factor is defined as the ratio of the actual maximum obtainable power to the product of the open circuit voltage and short circuit current. This is a key parameter in evaluating the performance of solar cells. Typical commercial solar cells have a fill factor ; 0. 70. Grade B cells have a fill factor usually between 0. 4 to 0. 7. 14] Cells with a high fill factor have a low equivalent series resistance and a high equivalent shunt resistance, so less of the current produced by the cell is dissipated in internal losses. Single p–n junction crystalline silicon devices are now approaching the theoretical limiting power efficiency of 33. 7%, noted as the Shockley–Queisser limit in 1961. In the extreme, with an infinite number of layers, the corresponding limit is 86% using concentrated sunlight. [pic] Reported timeline of solar cell energy conversion efficiencies (from National Renewable Energy Laboratory (USA)) MATERIALS [pic] [pic] The  Shockley-Queisser limit  for the theoretical maximum efficiency of a solar cell. Semiconductors with  band gapbetween 1 and 1. eV, or near-infrared light, have the greatest potential to form an efficient cell. (The efficiency â€Å"limit† shown here can be exceeded by  multijunction solar cells. ) Various materials display varying efficiencies and have varying costs. Materials for efficient solar cells must have characteristics matched to the spectrum of available light. Some cells are designed to efficiently convert wavelengths of solar light that reach the Earth surface. However, some solar cells are optimized for light absorption beyond Earth's atmosphere as well. Light absorbing materials can often be used in  multiple physical configurations  to take advantage of different light absorption and charge separation mechanisms.Materials presently used for photovoltaic solar cells include  monocrystalline silicon,  polycrystalline sil icon,  amorphous silicon,  cadmium telluride, andcopper indium selenide/sulfide. [25][26] Many currently available solar cells are made from bulk materials that are cut into  wafers  between 180 to 240  micrometers thick that are then processed like other semiconductors. Other materials are made as  thin-films  layers, organic  dyes, and organic  polymers  that are deposited on  supporting substrates. A third group are made from  nanocrystals  and used as  quantum dots  (electron-confined  nanoparticles). Silicon remains the only material that is well-researched in both  bulkand  thin-film  forms. CRYSTALLINE SILICON [pic]Basic structure of a silicon based solar cell and its working mechanism. By far, the most prevalent bulk material for solar cells is crystalline silicon (abbreviated as a group as c-Si), also known as â€Å"solar grade silicon†. Bulk silicon is separated into multiple categories according to crystallinity and crystal siz e in the resulting ingot, ribbon, orwafer. 1. monocrystalline silicon (c-Si): often made using the Czochralski process. Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon. Hence most c-Si panels have uncovered gaps at the four corners of the cells. 2. olycrystalline silicon, or multicrystalline silicon, (poly-Si or mc-Si): made from cast square ingots — large blocks of molten silicon carefully cooled and solidified. Poly-Si cells are less expensive to produce than single crystal silicon cells, but are less efficient. United States Department of Energy data show that there were a higher number of polycrystalline sales than monocrystalline silicon sales. 3. ribbon silicon is a type of polycrystalline silicon: it is formed by drawing flat thin films from molten silicon and results in a polycrystalline structure. These cells have lower efficiencies than poly-Si, but save on production costs due to a great reduction in silicon waste, as this approach does not require sawing from ingots. 4. ono-like-multi silicon: Developed in the 2000s and introduced commercially around 2009, mono-like-multi, or cast-mono, uses existing polycrystalline casting chambers with small â€Å"seeds† of mono material. The result is a bulk mono-like material with poly around the outsides. When sawn apart for processing, the inner sections are high-efficiency mono-like cells (but square instead of â€Å"clipped†), while the outer edges are sold off as conventional poly. The result is line that produces mono-like cells at poly-like prices. Analysts have predicted that prices of polycrystalline silicon will drop as companies build additional polysilicon capacity quicker than the industry's projected demand. On the other hand, the cost of producing upgraded metallurgical-grade silicon, also known as UMG Si, can potentially be one- sixth that of makingpolysilicon.Manufacturers of wafer-based cells have responded to high silicon prices in 2004–2008 prices with rapid reductions in silicon consumption. According to Jef Poortmans, director of IMEC's organic and solar department, current cells use between eight and nine grams of silicon per watt of power generation, with wafer thicknesses in the neighborhood of 0. 200 mm. At 2008 spring's IEEEPhotovoltaic Specialists' Conference (PVS'08), John Wohlgemuth, staff scientist at BP Solar, reported that his company has qualified modules based on 0. 180 mm thick wafers and is testing processes for 0. 16 mm wafers cut with 0. 1 mm wire. IMEC's road map, presented at the organization's recent annual research review meeting, envisions use of 0. 08 mm wafers by 2015. Gallium arsenide multijunction:High-efficiency multijunction cells were originally developed for special applications such as satellites and space exploration, but at present, their use in terrestrial conc entrators might be the lowest cost alternative in terms of $/kWh and $/W. [35] These multijunction cells consist of multiple thin films produced using metalorganic vapour phase epitaxy. A triple-junction cell, for example, may consist of the semiconductors: GaAs, Ge, and GaInP2. [36] Each type of semiconductor will have a characteristic band gap energy which, loosely speaking, causes it to absorb light most efficiently at a certain color, or more precisely, to absorb electromagnetic radiation over a portion of the spectrum.Combinations of semiconductors are carefully chosen to absorb nearly the entire solar spectrum, thus generating electricity from as much of the solar energy as possible. GaAs based multijunction devices are the most efficient solar cells to date. In October 15, 2012, triple junction metamorphic cell reached a record high of 44%. [37] Tandem solar cells based on monolithic, series connected, gallium indium phosphide (GaInP), gallium arsenide GaAs, and germanium Ge p–n junctions, are seeing demand rapidly rise. Between December 2006 and December 2007, the cost of 4N gallium metal rose from about $350 per kg to $680 per kg. Additionally, germanium metal prices have risen substantially to $1000–1200 per kg this year.Those materials include gallium (4N, 6N and 7N Ga), arsenic (4N, 6N and 7N) and germanium, pyrolitic boron nitride (pBN) crucibles for growing crystals, and boron oxide, these products are critical to the entire substrate manufacturing industry. Triple-junction GaAs solar cells were also being used as the power source of the Dutch four-time World Solar Challenge winners Nuna in 2003, 2005 and 2007, and also by the Dutch solar carsSolutra (2005), Twente One (2007) and 21Revolution (2009). The Dutch Radboud University Nijmegen set the record for thin film solar cell efficiency using a single junction GaAs to 25. 8% in August 2008 using only 4  µm thick GaAs layer which can be transferred from a wafer base to glass or pl astic film. THIN FILMS [pic]Market share of the different PV technologies  In 2010 the market share of thin film declined by 30% as thin film technology was displaced by more efficient crystalline silicon solar panels (the light and dark blue bars). Thin-film technologies reduce the amount of material required in creating the active material of solar cell. Most thin film solar cells are sandwiched between two panes of glass to make a module. Since silicon solar panels only use one pane of glass, thin film panels are approximately twice as heavy as crystalline silicon panels. The majority of film panels have significantly lower conversion efficiencies, lagging silicon by two to three percentage points. 31]  Thin-film solar technologies have enjoyed large investment due to the success of First Solar and the largely unfulfilled promise of lower cost and flexibility compared to wafer silicon cells, but they have not become mainstream solar products due to their lower efficiency and corresponding larger area consumption per watt production. Cadmium telluride  (CdTe),  copper indium gallium selenide  (CIGS) and  amorphous silicon  (A-Si) are three thin-film technologies often used as outdoor photovoltaic solar power production. CdTe technology is most cost competitive among them. [32]  CdTe technology costs about 30% less than CIGS technology and 40% less than A-Si technology in 2011. CADMIUM TELLURIDE SOLAR CELLA cadmium telluride solar cell uses a cadmium telluride (CdTe) thin film, a  semiconductor  layer to absorb and convert sunlight into electricity. Solarbuzzhas reported that the lowest quoted thin-film module price stands at US$0. 84 per  watt-peak, with the lowest crystalline silicon (c-Si) module at $1. 06 per watt-peak. [33] The  cadmium  present in the cells would be toxic if released. However, release is impossible during normal operation of the cells and is unlikely during ? res in residential roofs. [34]  A square meter of CdTe contains approximately the same amount of Cd as a single C cell  Nickel-cadmium battery, in a more stable and less soluble form. [34]COPPER INDIUM GALLIUM SELENIDE Copper indium gallium selenide (CIGS) is a  direct band gap  material. It has the highest efficiency (~20%) among thin film materials (see  CIGS solar cell). Traditional methods of fabrication involve vacuum processes including co-evaporation and sputtering. Recent developments at  IBM  and  Nanosolar  attempt to lower the cost by using non-vacuum solution processes. GALLIUM ARSENIDE MULTIJUNCTION High-efficiency multijunction cells were originally developed for special applications such as  satellites  and  space exploration, but at present, their use in terrestrial concentrators might be the lowest cost alternative in terms of $/kWh and $/W. 35]  These multijunction cells consist of multiple thin films produced using  metalorganic vapour phase epitaxy. A triple-junction cell, for example, may consist of the semiconductors:  GaAs,  Ge, and  GaInP2. [36]  Each type of semiconductor will have a characteristic  band gap  energy which, loosely speaking, causes it to absorb light most efficiently at a certain color, or more precisely, to absorb  electromagnetic radiation  over a portion of the spectrum. Combinations of semiconductors are carefully chosen to absorb nearly all of the solar spectrum, thus generating electricity from as much of the solar energy as possible. GaAs based multijunction devices are the most efficient solar cells to date.In October 15, 2012, triple junction metamorphic cell reached a record high of 44%. [37] Tandem solar cells based on monolithic, series connected, gallium indium phosphide (GaInP), gallium arsenide GaAs, and germanium Ge p–n junctions, are seeing demand rapidly rise. Between December 2006 and December 2007, the cost of 4N gallium metal rose from about $350 per kg to $680 per kg. Additionally, germanium metal p rices have risen substantially to $1000–1200 per kg this year. Those materials include gallium (4N, 6N and 7N Ga), arsenic (4N, 6N and 7N) and germanium, pyrolitic boron nitride (pBN) crucibles for growing crystals, and boron oxide, these products are critical to the entire substrate manufacturing industry.Triple-junction GaAs solar cells were also being used as the power source of the Dutch four-time  World Solar Challenge  winners  Nuna  in 2003, 2005 and 2007, and also by the Dutch solar carsSolutra (2005),  Twente One (2007)  and 21Revolution (2009). The Dutch  Radboud University Nijmegen  set the record for thin film solar cell efficiency using a single junction GaAs to 25. 8% in August 2008 using only 4  Ã‚ µm thick GaAs layer which can be transferred from a wafer base to glass or plastic film. Light-absorbing dyes (DSSC) Dye-sensitized solar cells  (DSSCs) are made of low-cost materials and do not need elaborate equipment to manufacture, so they can be made in a  DIY  fashion, possibly allowing players to produce more of this type of solar cell than others. In bulk it should be significantly less expensive than older  solid-state  cell designs.DSSC's can be engineered into flexible sheets, and although its  conversion efficiency  is less than the best  thin film cells, its  price/performance ratio  should be high enough to allow them to compete with  fossil fuel electrical generation. Typically a  ruthenium  metalorganic  dye  (Ru-centered) is used as a  monolayer  of light-absorbing material. The dye-sensitized solar cell depends on a  mesoporous  layer of  nanoparticulate  titanium dioxide  to greatly amplify the surface area (200–300 m2/g TiO2, as compared to approximately 10 m2/g of flat single crystal). The photogenerated electrons from the  light absorbing dye  are passed on to the  n-type  TiO2, and the holes are absorbed by an  electrolyte  on the other side of the dye.The circuit is completed by a redox couple in the electrolyte, which can be liquid or solid. This type of cell allows a more flexible use of materials, and is typically manufactured by  screen printing  or use of  Ultrasonic Nozzles, with the potential for lower processing costs than those used for  bulk  solar cells. However, the dyes in these cells also suffer from  degradation  under heat and  UV  light, and the cell casing is difficult to  seal  due to the solvents used in assembly. In spite of the above, this is a popular emerging technology with some commercial impact forecast within this decade. The first commercial shipment of DSSC solar modules occurred in July 2009 from G24i Innovations. [38] Quantum Dot Solar Cells (QDSCs)Quantum dot solar cells  (QDSCs) are based on the Gratzel cell, or  dye-sensitized solar cell, architecture but employ low  band gap  semiconductor  nanoparticles, fabricated with such small crystallite sizes th at they form  quantum dots  (such as  CdS,  CdSe,  Sb2S3,  PbS, etc. ), instead of organic or organometallic dyes as light absorbers. Quantum dots (QDs) have attracted much interest because of their unique properties. Their size quantization allows for the  band gap  to be tuned by simply changing particle size. They also have high  extinction coefficients, and have shown the possibility of  multiple exciton generation. [39] In a QDSC, a  mesoporous  layer of  titanium dioxide  nanoparticles forms the backbone of the cell, much like in a DSSC.This TiO2  layer can then be made photoactive by coating with semiconductor quantum dots using  chemical bath deposition,  electrophoretic deposition, or successive ionic layer adsorption and reaction. The electrical circuit is then completed through the use of a liquid or solid  redox couple. During the last 3–4 years, the efficiency of QDSCs has increased rapidly[40]  with efficiencies over 5% show n for both liquid-junction[41]  and solid state cells. [42]  In an effort to decrease production costs of these devices, the  Prashant Kamat  research group[43]  recently demonstrated a solar paint made with TiO2  and CdSe that can be applied using a one-step method to any conductive surface and have shown efficiencies over 1%. [44] Organic/polymer solar cellsOrganic solar cells  are a relatively novel technology, yet hold the promise of a substantial price reduction (over thin-film silicon) and a faster return on investment. These cells can be processed from solution, hence the possibility of a simple roll-to-roll printing process, leading to inexpensive, large scale production. Organic solar cells and  polymer solar cells  are built from thin films (typically 100  nm) of  organic semiconductors  including polymers, such as  polyphenylene vinylene  and small-molecule compounds like copper phthalocyanine (a blue or green organic pigment) and  carbon ful lerenes  and fullerene derivatives such as  PCBM. Energy conversion efficiencies achieved to date using conductive polymers are low compared to inorganic materials.However, it has improved quickly in the last few years and the highest  NREL  (National Renewable Energy Laboratory) certified efficiency has reached 8. 3% for the  Konarka  Power Plastic. [45]  In addition, these cells could be beneficial for some applications where mechanical flexibility and disposability are important. These devices differ from inorganic semiconductor solar cells in that they do not rely on the large built-in electric field of a PN junction to separate the electrons and holes created when photons are absorbed. The active region of an organic device consists of two materials, one which acts as an electron donor and the other as an acceptor.When a photon is converted into an electron hole pair, typically in the donor material, the charges tend to remain bound in the form of an  exciton, a nd are separated when the exciton diffuses to the donor-acceptor interface. The short exciton diffusion lengths of most polymer systems tend to limit the efficiency of such devices. Nanostructured interfaces, sometimes in the form of bulk heterojunctions, can improve performance. [46] In 2011, researchers at the Massachusetts Institute of Technology and Michigan State University developed the first highly efficient transparent solar cells that had a power efficiency close to 2% with a transparency to the human eye greater than 65%, achieved by selectively absorbing the ultraviolet and near-infrared parts of the spectrum with small-molecule compounds. 47]  [48]Researchers at UCLA more recently developed an analogous polymer solar cell, following the same approach, that is 70% transparent and has a 4% power conversion efficiency. [49]  The efficiency limits of both opaque and transparent organic solar cells were recently outlined. [50]  [51]  These lightweight, flexible cells can be produced in bulk at a low cost, and could be used to create power generating windows. Silicon thin films Silicon thin-film cells  are mainly deposited by  chemical vapor deposition  (typically plasma-enhanced, PE-CVD) from  silane  gas and  hydrogen  gas. Depending on the deposition parameters, this can yield:[52] 1. Amorphous silicon  (a-Si or a-Si:H) 2. Protocrystalline  silicon or 3. Nanocrystalline silicon  (nc-Si or nc-Si:H), also called microcrystalline silicon.It has been found that protocrystalline silicon with a low volume fraction of nanocrystalline silicon is optimal for high open circuit voltage. [53]  These types of silicon present dangling and twisted bonds, which results in deep defects (energy levels in the bandgap) as well as deformation of the valence and conduction bands (band tails). The solar cells made from these materials tend to have lower  energy conversion efficiency  than  bulk  silicon, but are also less expensive to p roduce. The  quantum efficiency  of thin film solar cells is also lower due to reduced number of collected charge carriers per incident photon. An amorphous silicon (a-Si) solar cell is made of amorphous or microcrystalline silicon and its basic electronic structure is the  p-i-n  junction. -Si is attractive as a solar cell material because it is abundant and non-toxic (unlike its CdTe counterpart) and requires a low processing temperature, enabling production of devices to occur on flexible and low-cost substrates. As the amorphous structure has a higher absorption rate of light than crystalline cells, the complete light spectrum can be absorbed with a very thin layer of photo-electrically active material. A film only 1 micron thick can absorb 90% of the usable solar energy. [54]  This reduced material requirement along with current technologies being capable of large-area deposition of a-Si, the scalability of this type of cell is high.However, because it is amorphous, i t has high inherent disorder and dangling bonds, making it a bad conductor for charge carriers. These dangling bonds act as recombination centers that severely reduce the carrier lifetime and pin the Fermi energy level so that doping the material to n- or p- type is not possible. Amorphous Silicon also suffers from the Staebler-Wronski effect, which results in the efficiency of devices utilizing amorphous silicon dropping as the cell is exposed to light. The production of a-Si thin film solar cells uses glass as a substrate and deposits a very thin layer of silicon by  plasma-enhanced chemical vapor deposition  (PECVD).A-Si manufacturers are working towards lower costs per watt and higher conversion efficiency with continuous research and development on  Multijunction solar cells  for solar panels. Anwell Technologies Limited  recently announced its target for mul